https://www.cbroinstruments.com Latest Products Fri, 08 May 2026 05:52:22 +0530 en-us https://www.cbroinstruments.com https://www.cbroinstruments.com/flow-meter.htm https://www.cbroinstruments.com/flow-meter.htm Wed, 27 Apr 2022 00:00:00 +0530 https://www.cbroinstruments.com/ultrasonic-flow-meter.htm https://www.cbroinstruments.com/ultrasonic-flow-meter.htm Flow Meter Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/ogf250m-oval-gear-flow-meter.htm https://www.cbroinstruments.com/ogf250m-oval-gear-flow-meter.htm Tue, 10 May 2022 00:00:00 +0530 CBRO OGF - 250M Oval gear Flow Meter the mechanical type positive diaplacement flow meter is used is a wide variety of applications including measuring of boiler fuel oil and diesel oil, as well as transactions of kerosene, light oil & heavy oil. OGF - 250M return - zero oval gear flow meter adopts the zero - returnable counter added to the basic model. The counter contains two groups of digit wheels-one for zero returning and the other for accumulation to undertake the cumulate and batch counter respectively. OGF-250M-A cast Iron oval gear flow meter is widely applicable to metering various oils and fluids that effects no corrosion on cast iron. OGF-250M-E cast steel oval gear flow meter is designed for metering a variety of high-pressure, Low corrosion fluids. Uniform rotator, small vibration, long working life. Low sensitivity to variance of viscosity, suitable applied in be high viscosity liquid. Simple instructions, small sizes, light weight, Simple installation, no need to install straight pipe section before meter   Applications: Lubricatinng Oil Epoxies Fuels Storage Tank Flow Meter Oil Counter Tank Truck Flow Meter High Accurycy, Wide Range Mechanical Display Easy Maintenance Easy to Read Output 4-20ma Profibus https://www.cbroinstruments.com/level-transmitters.htm https://www.cbroinstruments.com/level-transmitters.htm Tue, 10 May 2022 00:00:00 +0530 https://www.cbroinstruments.com/pressure-transmitters.htm https://www.cbroinstruments.com/pressure-transmitters.htm Wed, 02 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/btu-meters.htm https://www.cbroinstruments.com/btu-meters.htm Wed, 27 Apr 2022 00:00:00 +0530 https://www.cbroinstruments.com/submersible-hydrostatic-level-meter.htm https://www.cbroinstruments.com/submersible-hydrostatic-level-meter.htm Level Transmitters Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/hlt808-b-submersible-hydrostatic-level-meter.htm https://www.cbroinstruments.com/hlt808-b-submersible-hydrostatic-level-meter.htm Mon, 20 Jun 2022 00:00:00 +0530 https://www.cbroinstruments.com/hlt808-d-submersible-hydrostatic-level-meter.htm https://www.cbroinstruments.com/hlt808-d-submersible-hydrostatic-level-meter.htm Mon, 20 Jun 2022 00:00:00 +0530 https://www.cbroinstruments.com/2051-differential-pressure-transmitter.htm https://www.cbroinstruments.com/2051-differential-pressure-transmitter.htm Wed, 02 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/flange-mounted-differential-pressure-transmitter.htm https://www.cbroinstruments.com/flange-mounted-differential-pressure-transmitter.htm Wed, 02 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/50mm-to-350mm-inline-ultrasonic-btu-meter.htm https://www.cbroinstruments.com/50mm-to-350mm-inline-ultrasonic-btu-meter.htm Thu, 26 Mar 2026 00:00:00 +0530 The BTU meter is designed for accurate measurement of thermal energy consumption and is widely suitable for HVAC and district cooling applications, especially in Gulf countries where reliable performance in high-temperature environments is critical. The system comprises an ultrasonic flow sensor and two high-precision temperature sensors. It calculates thermal energy consumption based on flow rate and differential temperature between supply and return water. The ultrasonic flow sensor utilizes advanced non-invasive measuring technology, ensuring high accuracy and stable performance. It is not affected by impurities such as iron rust or external magnetic fields, making it ideal for demanding industrial and commercial applications. The meter body is manufactured from high-strength cast iron using advanced molding and CNC machining processes, ensuring excellent mechanical durability and dimensional accuracy. This guarantees long service life, stability, and consistent performance even under harsh environmental conditions. Temperature measurement is achieved using PT1000 platinum resistance sensors, combined with a high-precision AD circuit to deliver accurate and reliable readings. The MCU is based on the MSP430 ultra-low power microprocessor, offering strong processing capability, minimal power consumption, and excellent resistance to electromagnetic interference. The system includes self-diagnosis, fault display, and power-loss data memory, ensuring data integrity and operational reliability. Key Features Designed for export and Gulf region applications (high temperature & demanding conditions) High-precision ultrasonic flow measurement technology Measures and displays total thermal energy consumption Displays supply and return water temperature Displays differential temperature and real-time flow rate No mechanical moving parts – low maintenance and long life Low minimum flow detection capability Built-in real-time clock for data recording Display & Installation The BTU meter is equipped with an LCD screen for clear and accurate data display. It features a splittable design, allowing the calculator unit to be installed separately for easy monitoring and operation. Protection class IP68 ensures reliable performance in harsh environments, including humid and dusty conditions commonly found in Gulf regions. Connectivity & Functionality M-BUS / Modbus communication interface RS485 (optional) for remote monitoring Automatic error diagnosis and fault indication Data storage during power failure Durability & Reliability Engineered for long-term use in challenging environments: Robust metal body construction Waterproof calculator unit Shielded signal cables to prevent external damage (including rodents) Fully enclosed ultrasonic components for stable performance Installation Flexibility The BTU meter can be installed on either the supply pipe or return pipe, as per application requirements (to be specified at the time of ordering). https://www.cbroinstruments.com/ultrasonic-btu-meter.htm https://www.cbroinstruments.com/ultrasonic-btu-meter.htm BTU Meters Tue, 10 May 2022 00:00:00 +0530 https://www.cbroinstruments.com/clamp-on-ultrasonic-btu-meter.htm https://www.cbroinstruments.com/clamp-on-ultrasonic-btu-meter.htm Tue, 10 May 2022 00:00:00 +0530 The clamp-on ultrasonic heat meter is combined by our high accuracy clamp-on ultrasonic flow meter together with standard platinum temperature sensors (PT100 or PT1000),then get result of thermal energy measurement transferred from flow measurement  in a closed pipe accordingly.   The ultrasonic heat meter system mainly includes three parts: the main unit, the ultrasonic clamp-on type transducers, and the temperature sensors(PT100 or PT1000). The main unit is a high-accuracy ultrasonic transit-time flowmeter. Its enclosure can be a standard version or an explosive-proof version. The ultrasonic transducers are clamp-on type and very easy to install. The temperature sensors can be standard Pt sensor or customer-supplied sensor.   The calorimeter can be used for energy consumption measurement of a heating / cooling system in office buildings, apartment complexes, or any  liquid-based thermal energy production system. It can also be used to monitor the efficiency of an energy production system such as HVAC installation.   Key Features: Horizontal or vertical Installation  Transducer Max Temp: -20C to +160C Accuracy: +/-1% of reading above 0.6ft/sec / 0.2 m/sec Outputs available: 1x 4-20mA , 1x Pulse Output , 1x Alarm Output (All configurable) ModBus output Ingress Protection: Display= IP65, Transducers= IP65 (IP68 on request)   These ultrasonic flow meters can be used on virtually any pipe size or material, are non-invasive and are therefore not prone to the levels of deterioration that are seen by traditional intrusive flow meters. Mbus converter, Radio Pulse transmission and GSM/GPRS Telemetry / logging options on request.   Features: High accuracy - ±1% of reading Bi-directional flow measurement Wide range of fluid velocities - 0.03 ~ ± 105 feet/sec. Transducers for pipe sizes ranging from ½" to 240" (15 to 6000 mm) Measures energy consumption rate and total No moving parts, Fixed and Portable version Proven ultrasonic technology for flow measurement and PT 100 for temperature Clamp-on, spool piece or insertion mounting for flow measurement RS485 and Modbus communication protocols available 4-20mA and pulse outputs with available relays and alarms Data logger function - includes time & date, totalizer, diagnostics Fast response time - less than 1 second NIST traceable calibration certificate (optional   Applications: BTU metering system HVAC/Energy Monitoring Building Automation / HVAC Energy consumption supervision and water conservation management Cooling system and air conditioning/glycol solutions Heating & District Heating Solutions & Systems Smart Heat meteing Thermal energy measurement (heating and conditioning) and water metering (cold and worm) https://www.cbroinstruments.com/15mm-to-40mm-inline-ultrasonic-btu-meter.htm https://www.cbroinstruments.com/15mm-to-40mm-inline-ultrasonic-btu-meter.htm Mon, 13 Apr 2026 00:00:00 +0530 The threaded ultrasonic BTU meter UBM250I-T is designed for measuring thermal energy of small area where pipe size is not bigger than 40mm , e.g. apartment, villa, shop, etc. The BTU meter comprises of ultrasonic flow sensor and two temperature sensors, base on flow rate and differential temperature of supply / return water to calculate the thermal energy consumption. The product adopts a design of straight-through pipe, features with high measurement accuracy, low pressure drop, anti-blocking, stable operation and long service life. The product can be widely used in central heating/cooling and district heating/cooling systems for thermal energy measurement of residential, commercial and office building. High-quality fully enclosed ultrasonic element ensure accuracy and stability of flow measurement Using high-quality PT1000 temperature sensors, calibrated and matched to an accuracy better than +/- 0.1 ° C. Casing protection class IP68. Can be installed horizontally or vertically, and the head is detachable. With M-bus / Modbus protocol interface, compatible with BMS for remote reading function. RS485 is optional. Detachable battery case for quick replacement. Can be mounted on supply or return pipe (specify when ordering); Can be used for both heating and chilled water. https://www.cbroinstruments.com/m2m450-cloud-m2m-logger.htm https://www.cbroinstruments.com/m2m450-cloud-m2m-logger.htm Wed, 25 May 2022 00:00:00 +0530 Features: Software development and One Time Installation cost. Email id for the customer for login purpose.  Domain name subscription charges will be Rs 5000/- per year. Logo of CBRO Provision to add client ID, location under client ID and no. of units under the client ID. (Maximum 16 nos. of units per client ID) Login ID and password for above client ID. (2 nos. per client) 5 nos. of email ID for daily email per client ID. No SMS, only email alarms will be provided. Graph viewing duration settable. Data can be exported in CSV format, editable in MS Excel. We will provide 1 day full training to your Service Engineer https://www.cbroinstruments.com/electromagnetic-flow-meters.htm https://www.cbroinstruments.com/electromagnetic-flow-meters.htm Flow Meter Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/portable-ultrasonic-flow-meter.htm https://www.cbroinstruments.com/portable-ultrasonic-flow-meter.htm Tue, 01 Jul 2025 00:00:00 +0530 CBRO UFM250H portable clamp-on Ultrasonic Flowmeter is one of the most powerful Flowmeters available for liquid measurement. The utilisation of our ultrasonic signal processing, transit-time measurement and signal quality tracking technologies allow the Flowmeter to measure liquid flow rate from outside of a pipe reliably and accurately.   The Flowmeter is carefully designed, so that it is very compact and easy to use. A user can use hand to hold as well as to operate the Flowmeter main unit. The user-interface is self-explanatory and very easy to follow. Besides, the unique clamp-on fixture design makes the installation very simple and no special skills or tools required. Due to the non-intrusive nature of the clamp-on technique, there is no pressure drop, no moving parts, no leaks and no contamination.   Salient Features: Cost effective and versatile High accuracy 1.0% reading Non invasive, no moving parts, no pressure drop, no maintenance Easy and economical installation, no pipe cutting Wide measurement range 0 ~ 12m/s Wide pipe size range (DN 15 ~ 4570mm) Suitable for all commonly used pipe materials Bi-directional measurement. Totaliser display for net, positive and negative flow Ideal for both clean and opaque liquid flow measurement   Applications: Chemical, petrochemical and process Industries Fertilizers industries Pharmaceutical industries Food and drug industries Sugar, beverage industries Paper and pulp industries Water and waste water management Dredging industries Mining industries https://www.cbroinstruments.com/insertion-ultrasonic-flow-meter.htm https://www.cbroinstruments.com/insertion-ultrasonic-flow-meter.htm Wed, 25 May 2022 00:00:00 +0530 Salient Features: Cost-effective and versatile High accuracy 1.0% reading Non invasive, no moving parts, no pressure drop, no maintenance Easy and economical installation, no pipe cutting Wide measurement range 0.2 ~ 12m/s Wide pipe size range (DN 15 ~ 4570mm) Suitable for all commonly used pipe materials Bidirectional measurement. Totaliser display for net, positive and negative flow Ideal for both clean and opaque liquid flow measurement   Applications: Chemical, petrochemical and process industries Fertilizer industries Pharmaceutical industries Food and drug industries Sugar, beverage industries Paper and pulp industries Water and waste water management Dredging industries Mining industries https://www.cbroinstruments.com/clamp-on-wall-mounted-ultrasonic-flow-meter.htm https://www.cbroinstruments.com/clamp-on-wall-mounted-ultrasonic-flow-meter.htm Mon, 13 Apr 2026 00:00:00 +0530 MODEL: UFM250C Series CBRO make Ultrasonic flow meter works on the Transit Time or Time of Flight principle. The Flow meter unit utilizes two transducers that functions as both Ultrasonic transmitter and receiver. The transducers are either clamped on or inserted to the outside surface of the closed pipes. The transit time flow meter measures the time it takes for an ultrasonic signal transmitted from one transducer to cross the pipe and be received by second transducer. The flow is then measured by comparing the upstream and downstream time of Ultrasonic signal. With no flow through the pipe the transit time would be equal in both directions.     Salient Features Cost-effective and versatile High accuracy 1.0% reading Non-invasive, no moving parts, no pressure drop, no maintenance Easy and economical installation, no pipe cutting Wide measurement range 0.2 ~ 12m/s Wide pipe size range (DN 15 ~ 6000mm) Suitable for all commonly used pipe materials Bi-directional measurement. Totaliser display for net, positive and negative flow Ideal for both clean and opaque liquid flow measurement   Applications Chemical, petrochemical and process industries Fertilizers industries Pharmaceutical industries Food and drug industries Sugar, beverage industries Paper and pulp industries Water and waste water management Dredging industries Mining industries.   https://www.cbroinstruments.com/ufm250i-ultrasonic-flow-meter.htm https://www.cbroinstruments.com/ufm250i-ultrasonic-flow-meter.htm Wed, 04 May 2022 00:00:00 +0530 CBRO UFM250I inline type Flanged Battery Operated Ultrasonic Flowmeter provides abundant capabilities for accurate liquid flow measurement. It is widely used in remote location applications where Field Electric supply is not available.   Salient Features: Based on Transit Time technology Flow tube sizes 15 mm to 600 mm Battery powered with 5 years life Integral or remote transmitter Field interchangeable electronics GSM or GPRS AMR functionality Unique IP 68 rated transmitter housing High long-term stability and reliability   Applications: Process industries Water and waste water management Dredging industries Mining industries https://www.cbroinstruments.com/digimag250-full-bore-electromagnetic-flow-meter.htm https://www.cbroinstruments.com/digimag250-full-bore-electromagnetic-flow-meter.htm Tue, 10 May 2022 00:00:00 +0530 Electromagnetic flow measurement has been in use around the world for 50 years and more, as witnessed by the popularity of these meters that continues unabated in virtually all sectors of industry. Electromagnetic Flowmeters can be used to measure all electrically conductive liquids (> 5 µS/cm) with or without solids, e.g. water, wastewater, sludge, slurries, pastes, acids, alkalis, juices, fruit pulp, etc.   CBRO DIGIMAG250 Full Bore Electromagnetic Flowmeter is suitable for the most demanding applications. It is based on Faraday’s law of Electromagnetic Induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted either integral to the sensor or remotely with a field mount kit. CBRO Flowmeters are calibrated at our own Water Flow Calibration Facility. It uses the primary method of measuring the water flow by gravimetric principle. The facility is designed for calibration of flowmeters under controlled and stable flow conditions.   Salient Features: Based on Faraday’s law of electromagnetic induction Flow tube sizes 10 mm to 3000 mm and above Coil assembly in hermetically sealed welded construction Integral or remote transmitter Field interchangeable electronics High linearity due to characteristic magnetic field Absolute zero stability and noise elimination due pulsed DC excitation High long-term stability and reliability   Applications: Chemical, petrochemical and process industries Fertilizers industries Pharmaceutical industries Food and drug industries Sugar, beverage industries Paper and pulp industries Water and waste water management Dredging industries Mining industries https://www.cbroinstruments.com/electromagnetic-flow-meter-with-telemetry-system.htm https://www.cbroinstruments.com/electromagnetic-flow-meter-with-telemetry-system.htm Wed, 04 May 2022 00:00:00 +0530 CBRO Make Digital Flow Meter with Telemetry System as per the latest Central Groundwater Authority(CGWA) Guidelines. Also, this Digital Flow Meter with a Telemetry system is easy to install and user-friendly. It provides an IoT platform for water meters which is suitable for data acquisition from any remote location. Also, its Cloud platform having Real-Time Dashboard that allows viewing all analytical parameters as per CGWA guidelines.   Alerts or Notifications during parameter exceedance will be received through Email and SMS.   Features: Digital display for instantaneous flow reading. Followed by CGWA, CGWB, and CSWA/B guidelines. Remotely accessible because it provides an IOT platform for the water flow meters. Tampering Alert on Dashboard. Power failure Indication. Backup of data as per request. No Pressure drop in flow.   Two variants are available: Electromagnetic Flowmeter with Inbuilt Telemetry System Electromagnetic Flowmeter with External Telemetry System   Applications: Steel & Aluminum ETPs & STPs Sugar & Distilleries Paper & Pulp Food & Drug Petrochemical Fertilizer and Chemical Pharmaceutical https://www.cbroinstruments.com/insertion-electromagnetic-flow-meter.htm https://www.cbroinstruments.com/insertion-electromagnetic-flow-meter.htm Wed, 04 May 2022 00:00:00 +0530 Electromagnetic Flow measurement has been in use around the world for 50 years and more, as witnessed by the popularity of these meters that continues unabated in virtually all sectors of industry. Electromagnetic Flowmeters can be used to measure all electrically conductive liquids (> 5 µS/cm) with or without solids, e.g. water, wastewater, sludge, slurries, pastes, acids, alkalis, juices, fruit pulp, etc.   Insertion Type Electromagnetic Flowmeter is suitable for the most demanding applications. They are based on Faraday’s law of Electromagnetic Induction. The meter features sensor tube and ball valve assembly.   Salient Features: Based on Faraday’s law of electromagnetic induction Flow tube sizes 100 mm to 600 mm Coil assembly in hermetically sealed welded construction Integral or remote transmitter Field interchangeable electronics High linearity due to characteristic magnetic field Absolute zero stability and noise elimination due pulsed DC excitation   Applications: Chemical, petrochemical and process industries Fertilizer industries Pharmaceutical industries Sugar, beverage industries https://www.cbroinstruments.com/powermag2500-full-bore-electromagnetic-flow-meter.htm https://www.cbroinstruments.com/powermag2500-full-bore-electromagnetic-flow-meter.htm Wed, 04 May 2022 00:00:00 +0530 Adept POWERMAG2500 Full Bore Electromagnetic Flowmeter is a battery Powered Electromagnetic Flowmeter. It is mostly used in the applications where Electric Supply is not available and accurate Flow measurement is essential. The battery powers the Flowmeter for minimum 5 years. AMR Facility like GSM or GPRS is available in the Model. We offer Water Flow Meters with high accuracy rate. Suitable for all types of conductive fluids and water and waste water applications. Measure the rate of flow of slurries or conducting liquids flowing in closed pipes.   Salient Features: Based on Faraday’s law of electromagnetic induction Flow tube sizes 10 mm to 3000 mm and above Coil assembly in hermetically sealed welded construction Integral or remote transmitter Field interchangeable electronics High linearity due to characteristic magnetic field Absolute zero stability and noise elimination due pulsed DC excitation High long-term stability and reliability   Applications: Chemical, petrochemical and process industries Fertilizers industries Pharmaceutical industries Food and drug industries Sugar, beverage industries Paper and pulp industries Water and waste water management Dredging industries Mining industries https://www.cbroinstruments.com/vortex-flow-meter.htm https://www.cbroinstruments.com/vortex-flow-meter.htm Tue, 01 Jul 2025 00:00:00 +0530 CBRO vortex flowmeter is used for measuring the flow velocity of gases or liquids in pipelines flowing full. The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline. The periodic shedding of eddies occurs first from one side and then from the other side of a bluff body (vortex-shedding body) installed perpendicular to the pipe axis. Vortex shedding generates a so called "Karman vortex street" with alternating pressure conditions whose frequency is proportional to the flow velocity.   Features: Lattice LCD display Easy operation Configure with temperature/pressure senor. For temperature sensors, Pt100 or Pt1000; For pressure sensor, gauge pressure sensor or absolute pressure sensor Multiple Outputs can be optional: Two-Wire 4-20mA, Three-Wire pulse and Three-Wire equivalent output Excellent nonlinearity correction function, greatly improve the appearance of linearity Spectral analysis, improve the ability of anti-interference and vibration resistance A variety of measuring medium: vapor, liquid, gas and natural gas, etc. Low power consumption, a dry cell can maintain at least 3 years Automatic switching ability of the working modes: Battery supply, Two-Wire and Three-Wire Self-checking function: the rich self-checking information make easy maintenance and debugging Independent password setup, the parameters setup, total flow reset and calibration can be set with different- level passwords, it is convenient for management Three-Wire system supports RS485 communication The display unit can be selected and user-defined https://www.cbroinstruments.com/turbine-flow-meter.htm https://www.cbroinstruments.com/turbine-flow-meter.htm Tue, 01 Jul 2025 00:00:00 +0530 CBRO make TFM250 series Turbine Flow Meter  are designed for the volumetric measurements of liquids & gases. The meters are rugged, reliable & precise instruments suitable for all industrial corrosive & Non – Corrosive Chemicals, Fuels, and Oil & Gases etc. The basic meter consists of a freely suspended bladed rotor positioned axially in the flow stream with the flowing fluid pushing against the blades. The rotational speed of the turbine is proportional to the velocity of the fluid & hence truly represents the volume of the fluid flowing through meter. The rotation of turbine rotor generates electrical pulses in the pick off attached to flow meter housing. The output pulses are amplified & converted to measure flow rate & integration. Turbine sensor with four/six digit batch controller with ICO Relay output contact offered to transfer. Preset qty. Of liquid from main storage tank with automatic flow shut off. We are a credible Manufacturer, Exporter and Supplier of Turbine Flow Meter in India.   Applications: Water Diesel Petrol Vegetable Oil Hydraulic Oil Chemical (S.S. With Teflon coating) Milk plant. Air  Gases https://www.cbroinstruments.com/oval-gear-flow-meter.htm https://www.cbroinstruments.com/oval-gear-flow-meter.htm Flow Meter Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/cloud-m2m-logger.htm https://www.cbroinstruments.com/cloud-m2m-logger.htm Tue, 10 May 2022 00:00:00 +0530 https://www.cbroinstruments.com/helical-flow-meter.htm https://www.cbroinstruments.com/helical-flow-meter.htm Tue, 01 Jul 2025 00:00:00 +0530 Benefits: Affordable and Accurate: This meter has the ability to maintain consistent accuracy despite changing viscosity conditions, with accuracy of ±0.5% of reading. Rugged Construction: The CBRO solid meter construction is made of stainless steel with tungsten carbide bearings for corrosion resistance and durability Optional hard-coat gear offerings available. Flexible: May be used with a wide range of materials and viscosities with a low pressure drop than conventional meters and wide flow range/size selection. Proven Reliability & Performance: With a proven industry record for reliable meter life and electronics, these meters are ready to be installed into your process today.   Applications: This series of flow meters from CBRO is a high-resolution answer to your metering needs. Made of stainless steel, the meters in the HTFM series offer wide measuring ranges and low pressure loss. A helical-gear design gives these meters lower pressure drop compared to other meters and ideal for metering high viscosity polyurethanes, polymers, glues, sealants, and heavy fuel oils.   CBRO offers these specialized helical gear flow meters suitable for a variety of industrial application, including: Sealant / Adhesive Dispensing Applications – Single And Multi-component Paint Reclaim And Environmental Tracking Paint Circulation / Supply Paint Spray Operations-high Solids / Filled Materials Material Manufacturing – Monitoring / Batching Rim Applications Polyurethane And Polymer Light And Heavy Fuel Oil Petrochemical Products Thixotropical Fluids Crude Oil Fuel Oil Fat And Oils With Varying Viscosities Hydraulic Test Rigs With Varying Viscosities And Fluids Water / Glycol Mixtures Furnace Oil and all viscous liquid even viscosity change with temp https://www.cbroinstruments.com/digital-pressure-transmitter.htm https://www.cbroinstruments.com/digital-pressure-transmitter.htm Wed, 02 Jul 2025 00:00:00 +0530 CBRO high performance pressure transmitter is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. It outputs a 4~20mADC signal corresponding to the measured pressure.Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via HART communications. Other key features include quick response, remote set-up using communications, self-diagnostics and optional status output for pressure high/low alarm. High accuracy, high stability Explosion proof grade ExibllCT4 Local LCD display This series product is suitable for the occasion of chemical fiber, environmental protection, medicine, industrial control and etc. It is used to measure the pressure or height of the liquid level of corrosive medium, such as acid, alkaline and so on.   Features: Stainless steel sealed construction Intrinsically safe Protection class-IP65 Corosion resistant, with LCD display Short delivery time https://www.cbroinstruments.com/m2m6100-cloud-m2m-logger.htm https://www.cbroinstruments.com/m2m6100-cloud-m2m-logger.htm Wed, 25 May 2022 00:00:00 +0530 Features: Software development and One Time Installation cost. Email id for the customer for login purpose.  Domain name subscription charges will be Rs 5000/- per year. Provision to add client ID, location under client ID and no. of units under the client ID. (Maximum 16 nos. of units per client ID) Login ID and password for above client ID. (2 nos. per client) 5 nos. of email ID for daily email per client ID. No SMS, only email alarms will be provided. Graph viewing duration settable. Data can be exported in CSV format, editable in MS Excel. https://www.cbroinstruments.com/positive-displacement-flow-meter.htm https://www.cbroinstruments.com/positive-displacement-flow-meter.htm Tue, 10 May 2022 00:00:00 +0530 Applications: Kerosene Gasoline Diesel  Light Oil Heavy Oi Furnace Oil   Lube Oil  Grease Oil  Any High Viiscos Liquids https://www.cbroinstruments.com/capacitance-level-transmitter.htm https://www.cbroinstruments.com/capacitance-level-transmitter.htm Tue, 01 Jul 2025 00:00:00 +0530 The rapid growth is only possible if human resources become innovative and machines replace the hard work. This is the only option to save time and get the faster result. CBRO keep the similar thoughts. So, we are indulged in providing the best tech products for industry needs. CBRO is the solution for all tech-related market problems. The common usages of Capacitance Level Transmitter are for all liquids like acid, wine, milk, fruit juice, oil and other similar states of liquid.   Capacitance Level Transmitter No matter if users are unable to implement or use the products, we will help them out on just one call. Users are requested to drop their queries or problems through mails so that our technical experts can resolve them one by one.   Salient technical features of our designed Capacitance Level Transmitter: Stainless steel rod, Rope insulated partly or fully with PTFE is used as probe material. Normal temperature is minus 20 DEG C to 100 DEC C. In the special version of products, the temperature capacity can be increased up to 200 degree Celsius. Expected output is 4 to 20 made which is equals to 2 wire loop power. The product requires 12 to 30 V DC power voltages for smooth operation. Probe length or measuring range varies from 0.25 to 3M for Rod and from 1 to 20M for Rope. Process length and measuring range varies according to needs and applications. Also, mounting connection is also available as per request and application.   Liquid Applications: Acid Acetone Ammonia Benzine Feed Water CTC Diesel Oils Fruit Juice Milk Wine   Probe Specification Chart Conductive material: Water based solutions. Acids, Based etc – only insulated probe are suggested. Non-Conductivity material: Mostly petrochemical and solvents – insulated or non- insulated probes can be used. https://www.cbroinstruments.com/fuel-level-transmitter.htm https://www.cbroinstruments.com/fuel-level-transmitter.htm Tue, 01 Jul 2025 00:00:00 +0530 CBRO has designed the Fuel Level Transmitter to apply to every kind of fuel and similar products. It includes diesel, kerosene, and oil. The main usages of this fuel level transmitter are for measuring the fuel level. Capacitive Fuel trance are for fuel level measurement and management in fuel tanks of vehicle and stationary units. Nothing to worry about the product quality and cost for all industry-usable products because CBRO is now available everywhere to cater the market needs. Yes, we are online as well the offline platform that provides different transmitters, switches, meters, and sensors that are used in various industries.   Fuel Level Sensor Well-known as the best Fuel Level Transmitters manufacturer in India, we have incorporate highly innovative and work-efficient sensing probe in our fuel level transmitter. The use of this product for electrically conducting liquids like water is strictly prohibited. It may cause serious damage.   Check out the salient features of our designed fuel level transmitters series 5000: The response time for the product is better than 5 seconds. The product can handle operating temperature varying from 20 to 60 degree Celsius. It requires 12 to 30 VDC power supply. The mounting has different options in the sensing probe. All the internal as well as external body parts of the product are made of the best quality. Every product is offered at the least possible prices.   Sensing Probe: Mounting : Screwed – 3/4” BSP (standard) Or Flanged (optional) Sense : Pipe/Rod Stainless steel (SS 304) Grounding : Pipe, SS304 Length : 200 (standard) up to 2000 mm Accuracy : 3 mm Standard, 2 mm Special Version Operating Temp : 70 °C for the integral unit. (Standard)   Applications: Fuel level sensor capacitive fuel trance is designed for all types of fuel (Diesel, Kerosene, Oil) Fuel level measurement in fuel tank of vehicles and stationary units   IT IS PROHIBITED TO USE for level measurement of electrically conducting liquids (for example, water). https://www.cbroinstruments.com/radar-level-transmitter.htm https://www.cbroinstruments.com/radar-level-transmitter.htm Tue, 01 Jul 2025 00:00:00 +0530 CBRO is the quality Radar Level Transmitters manufacturer in India which is commonly used for rivers, lakes, shoals, Hoppers and Silos and other similar places. We manufacture& designs the product in such a way that incorporates all basic as well as advanced safety features. Known as the fastest Radar Level Transmitters supplier in India, following are the featured services that every user will entertain with our almost all products: Enjoy the best quality products with a certain warranty period. The least possible price is charged for the product. Also, we don’t compromise with the quality of the product at any cost. Three different books are available that are related to products. One is flipbook, other is manual and catalogue book. Download it and gather all the required information for the product. We are backed by industry’s best technical experts. All the products are designed by these professionals. Along with the durability of the product, safety and security is also considered while designing the product. https://www.cbroinstruments.com/ultrasonic-level-transmitter.htm https://www.cbroinstruments.com/ultrasonic-level-transmitter.htm Tue, 01 Jul 2025 00:00:00 +0530 We are ultrasonic level transmitter supplier in India. The main applications of Ultrasonic Level Transmitter are for water and wastewater treatment, pumping station, collection wells, biochemical reaction tank, sedimentation tanks, electric power, mining mortar pool, coal slurry pond, and various other similar projections.   There are various models and format for every design. The nature of all ultrasonic level transmitters is same, but they may have different purposes. Being the best Ultrasonic Level Transmitter manufacturer in India.   CBRO provides following featured services for its belonging products: Strong, stable sensor suitable for harsh industrial situation. Blind spots can also be manually set. Shielding the probe near the interference signal. 4 ~ 20MA current output, optional RS485 and Relays. The product is accurate measuring Transmitter. https://www.cbroinstruments.com/electromagnetic-btu-meter.htm https://www.cbroinstruments.com/electromagnetic-btu-meter.htm Wed, 25 Mar 2026 00:00:00 +0530 CBRO Make Electromagnetic BTU Meter [BTU-250] is engineered for precise measurement of thermal energy (heating or cooling) in water-based systems. It is ideal for HVAC and district energy applications, especially in Gulf countries where high temperature, reliability, and accuracy are critical. The system consists of three main components: Electromagnetic Flow Sensor Pair of High-Precision Temperature Sensors Intelligent Main Unit (Calculator) The main unit integrates accurate flow measurement, temperature sensing, and BTU calculation to determine thermal energy consumption and power required to maintain desired temperature levels. It provides: 9-digit display for total energy consumption 4-digit display for instantaneous power reading User-selectable engineering units: kW & kWh BTU/hr & BTU Key Features Designed for export markets and Gulf region conditions High-accuracy electromagnetic flow measurement (unaffected by pressure, temperature variations, or impurities) Precise thermal energy and power calculation User-selectable measurement units (kW/kWh or BTU/hr & BTU) No moving parts – ensures long life and low maintenance Stable performance in continuous industrial operations Suitable for both heating and cooling systems Applications Widely used across commercial, industrial, and infrastructure sectors: Chilled Water HVAC Systems Hot Water HVAC Systems Condensate & Heating Water Circuits Boiler Feed Water Systems Thermal Storage & Geothermal Systems Solar Hot Water Systems District Cooling / Energy Management & Billing Commercial Tenant Billing (Malls, Offices, Complexes) LEED / Green Building Verification & Energy Audits Power Plant Efficiency Monitoring Facility Management in: Shopping Malls Industrial Parks Hospitals Airports Government Buildings Large Commercial Complexes Why Choose This Meter Reliable performance in high-temperature Gulf environments High measurement accuracy for billing and energy management Durable construction for long-term industrial use Compatible with modern energy monitoring systems  https://www.cbroinstruments.com/steam-flow-meter.htm https://www.cbroinstruments.com/steam-flow-meter.htm Tue, 01 Jul 2025 00:00:00 +0530 The SFMc-150 flow meter is applicable for measuring flow rates of saturated and superheated steam, mass flow rates of Boiler feed Water in closed conduits. It is best suited for applications where affordability, reliability and ruggedness are of prime concerns.   It can be used as heat energy transfer meter to measure thermal energy using various fluids which are being used as the heat transfer medium.   In the conventional system of measurement, the differential pressure generated by orifice plate is measured by DP transmitter. The output from DP transmitter after square rooting is accepted as proportional to flow rate. This assumption is true only when the density is constant. Unfortunately, the density of the compressible fluid is never constant. The density of compressible fluid changes with line pressure and line temperature. Thus, introducing errors in flow rate measurement.   Features of Steam Flow Meter: Easy user-friendly programming Password protected for all modes except display mode Computer/Printer Interfacing with RS 232/RS 485 port with MODBUS RTU Fault indication indicated by different error codes Overflow indicated by blinking display up to 3000 readings (for more readings consult factory) Data logging facility with 3450/ 6900 number of reading is available Linear or square root operation Universal power supply Suitable for Saturated &/or Superheated Steam Two-alarm setting configured on pressure input Steam status indication (Saturated/ Superheated) Pressure and temperature offsets generated by site condition can be compensated Mass flow calculation as per ASME algorithm https://www.cbroinstruments.com/integral-display-flange-ultrasonic-flow-meter.htm https://www.cbroinstruments.com/integral-display-flange-ultrasonic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Flange ultraosnic flow meter is one kind of economy liquid flow meter which mainly measure various of pure liquid,such as:Clean water,Sea water,Dringking water,River water,Alcohol etc. And it is suitable for continuously measuring flow and heat of clean and uniform liquids without large concentration suspended particles or gases industrial environment.   Advantages :- Accuracy better than ±1.0% High reliability, high performance, low price Bi-directional flow measurement No moving parts, no wear, no pressure loss,Maintenance-free  Measuring conductivity liquid and Non-conductivity liquid Display instantaneous flow,Total flow,Heat,Positive flow,Negative flow High precision machined pipe sections, the sensor is installed before leaving the factory to ensure high measurement accuracy   Installation :-  Integral Display Flange Ultrasonic Flow Meter Installation Requirement Generally, the following principles should be followed: To select a pipe section filled with fluid, such as a vertical part of the pipeline or a horizontal pipe section filled with fluid. The measuring point should be 10 times the diameter from the upstream and the straight pipe section within 5 times the diameter from the downstream, and the distance from the valve outlet should be as far as possible. Ensure the temperature at the measuring point is within the working range.  Fully consider the fouling condition of the inner wall of the pipe, and try to select a non-scaling pipe section for measurement. When it cannot be satisfied, fouling should be considered as a lining for better measurement accuracy.  Select pipe sections with uniform and dense pipes that are easy for ultrasonic transmission. Please refer to the two examples on the right for the selection of measuring points.  https://www.cbroinstruments.com/ultrasonic-water-meter-with-amr-system.htm https://www.cbroinstruments.com/ultrasonic-water-meter-with-amr-system.htm Tue, 12 Aug 2025 00:00:00 +0530 Accumax offers smart flow meter devices, which provide accurate, cost effective and contemporary flow measurement for household and industries application. It is an advanced and highly accurate ultrasonic water meter with AMR (Automatic meter reading) technology. It can be used for industrial application as well as for residentials application. The ultrasonic AMR water flow meter measurement is based on the transit time method also It has full information LCD display, which is easy to read the data and see the alarms. Ultrasonic AMR meter has wide applications as it’s based on LORA technology and automatic reading meter (AMR) Features: Because of LORA module,  Long range transmission is possible In-built data logger in order to see history record Transit time ultrasonic technology in order to provide accuracy and ultra-reliable metering Multi communication support Dedicated daily information details availability Different 5 Alarm indication Easy to install due to compact size Long battery life   Application:- Industrial R.O. Residential water metering Water supply schemes Smart water billing https://www.cbroinstruments.com/modular-type-ultrasonic-flow-meter.htm https://www.cbroinstruments.com/modular-type-ultrasonic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Modular type ultrasonic flow meter is one type ultrasonic flow meter with small size and competitive price. It’s working based on transmit-time working theory. One ultrasonic sensor send ultra-sound wave and another one sensor could receive this wave. The transmit time from send to receive have relationship with the velocity of flow speed. Then, converter could calculate the flow speed based the transmit time. Advantages :- Modular Type Ultrasonic Flow Meter Advantages and Disadvantages 1. Modular type ultrasonic flow meter is different with other type ultrasonic flow meters. It have much smaller size and could be installed into instrument box easily via DIN rail. It will save installation space. 2. It have multiple functions, such as LCD display, 4-20mA, pulse and RS485 output. No pressure loss, measurement is not affected by temperature and pressure changes. And the accuracy for it could reach ±1%. 3. Reliable empty full tube detection technology, Excellent low flow rate measurement performance, turndown ratio 100:1.   4. As a professional manufacturer, we could produce it with solar panel power system also. It’s very convenient for working site where don’ t have external power supply.  Application :-  Modular type ultrasonic flow meter used in tap water, heating, water conservancy, metallurgy, chemical, machinery, energy and other industries. It can be used for production inspection, flow verification, temporary inspection, flow inspection, water meter horizontal debugging and energy saving monitoring.   It is a tool and meter for timely detection of flow. Installation:- Modular Type Ultrasonic Flow Meter Installation   “V” method installation: The “V” method installation is a relatively standard installation method, which is easy to use and accurate in measurement. When installing the two sensors, the center line of the two sensors can be aligned horizontally with the axis of the pipeline. It’s used on DN15mm and DN400mm.   “Z” method installation: “Z” method of installation is the most commonly used method also. It is characterized by direct transmission of ultrasonic waves in the pipeline, no reflection (called single sound path), low signal attenuation loss. It’s used on DN100mm to DN6000mm.   Modular Type Ultrasonic Flow Meter Maintenance 1. Always observe whether the sensor power cable and transmission cable (or wire) of the instrument are damaged or aging. You need to protect the rubber sheath outside the cable.   2. For the clamp on type transducer ultrasonic flow meter, it is necessary to check whether the transducer is loose or not; whether the adhesive between it and the pipe is normal. https://www.cbroinstruments.com/handheld-ultrasonic-flow-meter.htm https://www.cbroinstruments.com/handheld-ultrasonic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 CBRO handheld ultrasonic flow meter realizes non-contact measurement of liquid flow. Install the sensor on the outer wall of the pipeline to complete the flow measurement. It has the characteristics of small size. Convenient carrying and accurate measurement. Handheld Ultrasonic Flow meter Principle Working: Time-transit measurement principle is adopted, the signal transmitted by one flow meter transducer passes through the pipe wall, the medium, the second transducer also transmits the signal received by the first transducer. The influence of the medium flow rate, there is a time difference, flow value Q can be obtained. Application Handheld Ultrasonic Flow Meter Applications   This flow meter is widely used in tap water, heating, water conservancy, metallurgy chemical,machinery, energy and other industries. It can be used for production monitoring, flow verification, temporary detection, flow inspection, water meter balance debugging,heating network balance debugging,energy-saving monitoring, and it is a necessary tool and meter for timely flow detection. Installation Handheld ultrasonic flow meter installation requirements The state of the pipeline for measuring the flow will greatly affect the measurement accuracy, the detector installation location should be selected in a place that meets the following conditions: 1. It must be ensured that the straight pipe section where the probe is installed is: 10D on the upstream side(D is the pipe diameter), 5D or more on the downstream side, and there must be no factors that disturb the fluid(such as pumps,valves, throttles, etc.) in the 30D on the upstream side. And try to avoid the unevenness and welding position of the pipeline under test. 2. The pipeline is always full of liquid, and the fluid should not contain bubbles or other foreign objects. For horizontal pipelines, install the detector within ±45°of the horizontal centerline. Try to choose the horizontal centerline position. 3. When install the ultrasonic flow meter, need to input these parameters:  pipe material,pipe wall thickness and pipe diameter. Fulid type, whether it contains impurities,bubbles, and whether the tube is full. https://www.cbroinstruments.com/open-channel-flow-meter.htm https://www.cbroinstruments.com/open-channel-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Open Channel Flow Meter is an economical solution for open channel measuring， which measures level, flow rate and total volume of water flowing through weirs and flumes.  The meter includes a non-contact ultrasonic level sensor to detect the water level and then calculates the flow rate and volume using the Manning equation and characteristics of the channel.  Advantages Open Channel Flow Meter Advantages and Disadvantages   Economical and reliable. The accuracy of change in level is 1 mm. Suitable for a variety of weirs and flumes, Parshall flumes (ISO),  V-Notch weirs, Rectangular weirs(With or Without End Contractions) and custom Formula type weir;  Displays flow rate in L/S , M3/h or M3/min;  Clear display with Graphical LCD(with backlight) ; The cable length between probe and host up to 1000m; The probe with leak-proof structure and IP68 protect grade; Chemically resistant probe materials for maximum application flexibility; Provided 4-20mA output and RS485 serial communication (MODBUS-RTU) output; Provided programmable 6 relays at most for alarms; Three button for programming easy configuration and operation（opt.） Installation Open channel flow meter Hints for probe mounting 1. The probe can be supplied as standard or with a screw nut or with an ordered flange. 2. For applications requiring chemical compatibility the probe is available fully enclosed in PTFE.  3. The use of metallic fittings or flanges is not recommended. 4. For exposed or sunny locations a protective hood is recommended. 5. Make sure that the probe is mounted perpendicular to the monitored surface and ideally, at least 0.25 meters above it, because the probe cannot get response in the blind zone. 6. The probe has a 10 inclusive conical beam angel at 3 db and must be mounted with a clear unobstructed sight of the liquid to be measured. But smooth vertical sidewalls weir tank will not cause false signals. 7. The probe must be mounted upstream of the flume or weir. 8. Do not over-tighten the bolts on flange. 9. The stilling well can be used when there is volatility in the water or needs to improve the accuracy of level measurement. The still well connect with the bottom of the weir or flume, and the probe measures the level in the well. 10. When install to the cold area, should choose the lengthen sensor and make the sensor extend into the container, shun frost and icing. 11. For Parshall flume, the probe should be installed in a position the 2/3 contraction away from the throat.   12. For V-Notch weir and rectangular weir, the probe should be installed on the upstream side, the maximum water depths over the weir and 3~4 times away from the weir plate.   https://www.cbroinstruments.com/electromagnetic-flow-meter.htm https://www.cbroinstruments.com/electromagnetic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Electromagnetic water meter is a kind of instrument for measuring the volume flow of conductive liquid based on Faraday’s principle of electromagnetic induction. It has the characteristics of wide range, low initial flow, low pressure loss, real-time measurement, cumulative measurement, bi-direction measurement, etc. It mainly uses DMA zoning, online monitoring, water loss analysis and statistical settlement of water supply mains.Advantages :-1 No blocking parts inside of measuring tube, low pressure loss and low requirements for straight pipeline. 2 Variable diameter design, improve measurement accuracy and sensitivity, reduce excitation power consumption. 3 Select suitable electrodes and liner, with good corrosion resistance and wear resistance.  4 Full electronic design, strong anti-interference ability, reliable measurement, high accuracy, wide flow range.Application :- Electromagnetic water meter is a metering instrument specially designed for the actual requirements of water supply enterprises, specially designed for water industry, which can optimize water supply and ensure accurate water trade measurement and settlement. Practice has proved that electromagnetic water meter is the ideal choice to solve the measurement contradiction of large water users. In addition, electromagnetic water meters are widely used in chemical industry, environmental protection, metallurgy, medicine, paper making, water supply and drainage and other industrial technology and management departments.Installation :-Installation environment selection1. Stay away from devices with strong electromagnetic fields. Such as large motor, large transformer, large frequency conversion equipment.2. The installation site should not have strong vibration, and the ambient temperature does not change much.3. Convenient for installation and maintenance. Selection of installation location1. The flow direction mark on the sensor must be consistent with the flow direction of the measured medium in the pipeline.2. The installation position must ensure that the measuring tube is always filled with the measured medium.3. Select the place where the fluid flow pulse is small, that is, it should be far away from the water pump and local resistance parts (valves, elbows, etc.)4. When measuring the two-phase fluid, choose the place which is not easy to cause phase separation.5. Avoid installation in the area with negative pressure in the tube. 6. When the measured medium easily causes the electrode and the inner wall of the measuring tube to adhere to and scale, it is recommended that the flow rate in the measuring tube be no less than 2m/s. At this time, a tapered tube slightly smaller than the process tube can be used. In order to clean the electrode and measuring tube without interrupting the flow in the process tube, the sensor can be installed in parallel with a cleaning port. https://www.cbroinstruments.com/tri-clamp-electromagnetic-flow-meter.htm https://www.cbroinstruments.com/tri-clamp-electromagnetic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Tri-clamp electromagnetic flow meter is a kind of volume flow meter. Tri-clamp electromagnetic flow meter is made of stainless steel, which can be easily disassembled and cleaned quickly, so it is not easily polluted during use, and can effectively prevent the accumulation of measuring fluid residues in the measuring tube. Wafer electromagnetic flow meter working: The product is based on Faraday’s law of electromagnetic induction, used to measure the conductance greater than 20 μS/cm volume of conductive liquid flow. In addition to measuring the general volume of conductive liquid flow, but also can be used to measure strong acid, alkali and other strong corrosive liquids and mud, pulp, etc.Advantages :-Tri-clamp Electromagnetic Flow Meter Advantages and Disadvantages:Tri-clamp electromagnetic flow meter is easy to be installed and dismantled. It adopts Harmless food grade stainless steel as raw material, so it can touch with food directly.Stainless steel material has long service life, and SS316 is a kind of anti-corrosive stainless steel, so it can be used to measure most of drinks. It has small size and light weight so it can save your freight fee. It has multiple output signals for choose. It has current output and pulse output for connecting with PLC or other devices. And you can also read flow measurement by RS485/HART/Profibus.ApplicationTri-clamp electromagnetic flow meter is mainly used in drinking water, milk, ground water, beer, wine, jam, juice and other food & drink industries. It is also widely used in paper pulp, gypsum slurry because it can be cleaned easily.It adopts harmless stainless steel material so it can measure food directly. And it can withstand high temperature steam disinfection.Local display type can withstand -20-60 deg C temperature, remote display can withstand -20-120 deg C https://www.cbroinstruments.com/flange-electromagnetic-flow-meter.htm https://www.cbroinstruments.com/flange-electromagnetic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Electromagnetic flow meter is one of the most popular flow meters. Flange type electromagnetic flow meter has been used for more than 50 years worldwide. It is widely used for all conductive liquids in every industry, such as water, acid, alkali, milk, slurry etc. Since founded in 2005, CBRO has sold more than 600 thousand electromagnetic flow meters to provide the solutions for clients in different work conditions. Advantages :-  Electromagnetic Flow Meter Advantages and Disadvantages The main advantages of using electromagnetic flow meter is that it is with no moving parts, no pressure loss and require very less maintenance.   Flange type magnetic flow meter can be made large size range from DN3-DN3000mm and with bi-directional flow measurement. CBRO mag flow meters are with built-in self-diagnosis function and support data record / bluetooth function and various kinds of output signals.  Electromagnetic flow meter will be affected if there’s strong magnetic filed in the surrounding environment. Application :-  Flange Electromagnetic Flow Meter Installation Requirement Electromagnetic flow meter is widely used in water treatment, food industry, pharmaceutical, petrochemical, paper mill, chemical monitoring etc.  In the metallurgical industry, it is often used to control the flow of cooling water for continuous steel casting, continuous steel rolling, and steel-making electric furnaces;  In the field of water supply and drainage in public utilities, electromagnetic flow meters are often used for the transfer measurement of finished product water and raw water in water plants; In the pulp process of the paper industry, electromagnetic flow meters are involved in the measurement of the flow of grinding pulp, water, acid, and alkali;  In the coal industry, measuring coal washing and pipeline hydraulic conveying coal slurry. For food and beverage industries, it is used for beer and beverage filling measurement. For chemical and petrochemical industries, it is used to measure corrosive liquids, such as acids and alkalis etc Installation :-  Flange Electromagnetic Flow Meter Installation Requirement   In order to obtain a stable and accurate flow measurement, it is very important that the flow meter is installed correctly in the pipe system. Do not install the meter near equipment that produces electrical interference such as electric motors, transformers, variable frequency, power cables etc. Avoid locations with pipe vibrations for example pumps. Do not install the meter close to pipeline valves, fittings or impediments which can cause flow disturbances. Place the meter where there is enough access for installation and maintenance tasks. https://www.cbroinstruments.com/battery-powered-electromagnetic-flow-meter.htm https://www.cbroinstruments.com/battery-powered-electromagnetic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Battery-powered magnetic flow meter can be used in remote area where don’t have power grid . It is widely used for all conductive liquids in every industry, such as water, acid, alkali, milk, slurry etc. Since founded in 2005, CBRO has been focused in magnetic flow meter manufacturing for more than 15 years. More than 600 thousand mag meters had been provided to clients all over the world for different work conditions. Advantages :- Battery Powered Electromagnetic Flow Meter Advantages and Disadvantages has a long life span, standard battery can work for 3-6 years, determined by the excitation current 2.Dual power supply: it’s equipped with external power supply interface, which can be powered by external 12-24vdc power supply, enabling users to have a variety of power options; 3. Multiple network interfaces: W803 has GPRS, RS485, HART and other network communication for users;   4.Multiple work mode: W803E has ‘Flow Only’ mode, ‘Flow + Pressure’ mode, ‘Flow + Temperature’ mode for users.  Application :-  Electromagnetic flow meter is widely used in water treatment, food industry, pharmaceutical, petrochemical, paper mill, chemical monitoring etc.  In the metallurgical industry, it is often used to control the flow of cooling water for continuous steel casting, continuous steel rolling, and steel-making electric furnaces; In the field of water supply and drainage in public utilities, electromagnetic flow meters are often used for the transfer measurement of finished product water and raw water in water plants; In the pulp process of the paper industry, electromagnetic flow meters are involved in the measurement of the flow of grinding pulp, water, acid, and alkali;  In the coal industry, measuring coal washing and pipeline hydraulic conveying coal slurry. For food and beverage industries, it is used for beer and beverage filling measurement.   For chemical and petrochemical industries, it is used to measure corrosive liquids, such as acids and alkalis etc. Installation :- Battery Powered Electromagnetic Flow Meter Installation Requirement In order to obtain a stable and accurate flow measurement, it is very important that the flow meter is installed correctly in the pipe system. Do not install the meter near equipment that produces electrical interference such as electric motors, transformers, variable frequency, power cables etc. Avoid locations with pipe vibrations for example pumps. Do not install the meter close to pipeline valves, fittings or impediments which can cause flow disturbances.   Place the meter where there is enough access for installation and maintenance tasks. https://www.cbroinstruments.com/partially-filled-pipe-electromagnetic-flow-meter.htm https://www.cbroinstruments.com/partially-filled-pipe-electromagnetic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Partially filled pipe electromagnetic flow meter is a kind of volume flow meter. It was specially designed for partially filled pipe. It can measure liquid volume from 10% level of the pipe to 100% level of the pipe. It’s accuracy can reach to 2.5%, very accurate for irrigation and waste water liquid measurement. It use remote LCD display so users can read the flow measurement easily. We also provide solar power supply solution for some remote areas where has no power supply. Advantages :-  Partially filled pipe electromagnetic flow meter Advantages & Disadvantages Partially filled pipe electromagnetic flow meter can measure partially filled pipe liquid flow, it is very popular in irrigation. Its can use solar power supply, this type is very suitable for remote areas where has no industrial power supply. It adopts safe and durable material, service life is longer than normal products. Normally, it can work at least 5-10 years or longer.   We use an accurate mini ultrasonic level meter for its liquid level measurement then the flow meter will record the liquid  use this parameter to measure liquid flow.  Application :-  Partially filled pipe electromagnetic flow meter can measure water, waste water, paper pulp, etc. We use rubber or polyurethane liner on it, so it can measure most of none corrosive liquid. It is mainly used in irrigation, water treatment, etc.   It withstand -20-60 deg C media temperature, and it was very durable and safe. Installation :-  Partially Filled Pipe Electromagnetic Flow Meter Installation and Maintainance 1.Installation Partially filled electromagnetic flow meter should be installed correctly to ensure good measurement. Normally we need leave 10D(10 times of diameter) straight pipe distance before partially filled pipe electromagnetic flow meter and 5D behind partially filled pipe electromagnetic flow meter. And try to avoid elbow/valve/pump or other device which will influent the flow speed. If the distance is not enough, then please install flow meter according to follow picture.   2.Maintenance Routine maintenance: only need to make periodic visual inspections of the instrument, check the environment around the instrument, remove dust and dirt, ensure that no water and other substances enter, check whether the wiring is in good condition, and check whether there are newly installed strong electromagnetic field equipment or newly installed wires near the instrument Cross-instrument. If the measuring medium easily contaminates the electrode or deposits in the measuring tube wall, it should be cleaned and cleaned regularly. 3.Fault finding: if the meter is found to work abnormally after the flow meter has been put into operation or normal operation for a period of time, the external conditions of the flow meter should be checked first, such as whether the power supply is good, whether the pipeline is leaking or in a state of partial pipe, whether there is any in the pipeline Whether air bubbles, signal cables are damaged, and whether the output signal of the converter (that is, the input circuit of the subsequent instrument) is open. Remember to dismantle and repair the flow meter blindly. 4.Sensor inspection 5.Converter check https://www.cbroinstruments.com/wafer-electromagnetic-flow-meter.htm https://www.cbroinstruments.com/wafer-electromagnetic-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Wafer electromagnetic flow meter is a kind of volume flow meter. It uses a new generation of special high-quality lining technology and a special mirror-polished PFA lining, which is especially suitable for the measurement of viscous pulp and gypsum slurry. Its detachable electrode makes maintenance more convenient. Principle of Wafer electromagnetic flow meter : The product is based on Faraday’s law of electromagnetic induction, conductance greater than 20 μS/cm volume of conductive liquid flow. In addition to measuring the general volume of conductive liquid flow, but also can be used to measure strong acid, alkali and other strong corrosive liquids and mud, pulp, etc. Advantages :-  Wafer Electromagnetic Flow Meter Advantages and Disadvantages Wafer electromagnetic flow meter has short body, it can be installed in narrow areas such as well, ditch, irrigation pipe, etc. It matches all flanges like ANSI, DIN, JIS, etc. So if you don’t know the flange standards, you can choose this type. And wafer electromagnetic flow meter adopts harmless and durable stainless steel as raw material(SS304 or SS316), so it can be used for drinking water, underground water, etc. For food grade measurement, we suggest customer use SS316 material.   Wafer electromagnetic flow meter is easy to delivery, save your freight fee. Not only its body is short and thin, but its weight is also very light. Application Wafer Electromagnetic Flow Meter Application Electromagnetic flow meter is widely used in water treatment, food industry, pharmaceutical, petrochemical, paper mill, chemical monitoring etc.  In the metallurgical industry, it is often used to control the flow of cooling water for continuous steel casting, continuous steel rolling, and steel-making electric furnaces;  In the field of water supply and drainage in public utilities, electromagnetic flow meters are often used for the transfer measurement of finished product water and raw water in water plants; In the pulp process of the paper industry, electromagnetic flow meters are involved in the measurement of the flow of grinding pulp, water, acid, and alkali;  In the coal industry, measuring coal washing and pipeline hydraulic conveying coal slurry. For food and beverage industries, it is used for beer and beverage filling measurement.   For chemical and petrochemical industries, it is used to measure corrosive liquids, such as acids and alkalis etc.  Installation :-  Wafer Electromagnetic Flow Meter Installation & Maintainance 1. Installation First of all, we need choose a pair of matching flanges. Then connect the flow meter with pipeline. Wafer electromagnetic flow meter should be installed correctly to ensure good measurement. Normally we need leave 10D(10 times of diameter) straight pipe distance before wafer electromagnetic flow meter and 5D behind wafer electromagnetic flow meter. And try to avoid elbow/valve/pump or other device which will influent the flow speed. If the distance is not enough, then please install flow meter according to follow picture. 2. Maintenance   Routine maintenance: only need to make periodic visual inspections of the instrument, check the environment around the instrument, remove dust and dirt, ensure that no water and other substances enter, check whether the wiring is in good condition, and check whether there are newly installed strong electromagnetic field equipment or newly installed wires near the instrument Cross-instrument. If the measuring medium easily contaminates the electrode or deposits in the measuring tube wall, it should be cleaned and cleaned regularly. https://www.cbroinstruments.com/vortex-flow-meters.htm https://www.cbroinstruments.com/vortex-flow-meters.htm Flow Meter Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/field-display-vortex-flow-meter.htm https://www.cbroinstruments.com/field-display-vortex-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Flange vortex flow meter is used in numerous branches of industry to measure the volume flow of liquids, gases and steam. Applications in the chemicals and petrochemicals industries, for example, in power generation and heat-supply systems involve widely differing fluids: saturated steam, superheated steam, compressed air, nitrogen, liquefied gases, flue gases, carbon dioxide, fully demineralized water, solvents, heat-transfer oils, boiler feedwater, condensate, etc.  Advantages :-  Vortex flow meter advantages and disadvantages   Vortex flow meter body is robust and universally applicable for liquids, gases and steam,optimized for steam applications. CBRO Vortex flow meter adopt Japan OVAL technology and design. To protect the sensor, CBRO vortex flow meter choose embedded sensor, with 4 piezo-electric crystal encapsulated inside the sensor, which is our own patent. There is no moving parts, no abrasion, non-wearing parts inside the vortex flow meter sensor, fully welded SS304 body (SS316 selectable). With patented sensor and flow sensor body, CBRO vortex flow meter could eliminate drift & vibration influence from great aspect in the working site while compare with other flow meters. Application :-  Vortex flow meter application Vortex flow meter is professional in measuring non-conductive liquids, gases, saturated and superheated steam, especially for steam measurement trade settlement. Except work as flow meter, vortex flow meter can also work as heat meter to measure the Gross/net heat of steam and hot water. Vortex flow meter usually monitor the compressor output and evaluation of Free Air Delivery (FAD) There has lots of Industrial gases, such as natural gas, nitrogen gas, liquefied gases, flue gases, carbon dioxide etc, all could use vortex flow meter. In many factories, compressed air monitoring is very important, vortex flow meter also could use for process control. Besides the different gases measurement, vortex flow meter could also used for light oil or any purified water，such as thermal oils, Desalinated water, demineralized water, RO water, boiler feed water, condensate water etc.    In the Chemicals and petrochemicals industries, there also has lots of gases or liquid could use vortex flow meter for monitoring. Installation :-  1. The installation of vortex flow meter has higher requirements, to guarantee the better accuracy and working properly. Vortex flow meter installation should keep away from the electric motors, big frequency converter, power cable, transformers, etc. Do not install in the position where there has bends, valves, fittings, pumps etc, which could cause flow disturbances and influence the measurement. The front straight pipe line and after straight pipe line should follow below suggestion. 2. Vortex Flow Meter Daily Maintenance Regular cleaning: The probe is an important structure of the vortex flowmeter. If the detection hole of the probe is blocked, or is entangled or wrapped by other objects, it will affect the normal measurement, resulting in inaccurate results; Moisture-proof treatment: most of the probes have not undergone moisture-proof treatment. If the use environment is relatively humid or is not dried after cleaning, the performance of the vortex flow meter will be affected to a certain extent, resulting in poor operation; Minimize external interference: strictly check the grounding and shielding conditions of the flow meter to ensure the accuracy of the flow meter measurement;   Avoid vibration: There are some parts inside the vortex flowmeter. If strong vibration occurs, it will cause internal deformation or fracture. At the same time, avoid the inflow of corrosive liquid. https://www.cbroinstruments.com/remote-type-vortex-flow-meter.htm https://www.cbroinstruments.com/remote-type-vortex-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Remote Wallmounted Vortex Flow Meter is used in numerous branches of industry to measure the volume flow of liquids, gases and steam. Applications in the chemicals and petrochemicals industries, for example, in power generation and heat-supply systems involve widely differing fluids: saturated steam, superheated steam, compressed air, nitrogen, liquefied gases, flue gases, carbon dioxide, fully demineralized water, solvents, heat-transfer oils, boiler feedwater, condensate, etc.  Advantages :-  Vortex flow meter advantages and disadvantages Vortex flow meter body is robust and universally applicable for liquids, gases and steam,optimized for steam applications.  In gas measurement, vortex flow meter could achieve high accuracy ±0.75%~±1.0% of reading ( gas ±1.0%, liquid ±0.75%); which could use in custody transfer , while the metal tube rotameter or orifice plate usually use for process control. With a variety of signals outputs and selection, such as 4-20mA, pulse with HART or pulse with RS485 are selectable.   In the electronic device of measuring flow, vortex flow meter is the only one could resist wide temperature range up to highest temperature 350℃, digital flow meter highest process temperature.  Application :- Vortex flow meter applications Vortex flow meter is professional in measuring non-conductive liquids, gases, saturated and superheated steam, especially for steam measurement trade settlement. Except work as flow meter, vortex flow meter can also work as heat meter to measure the Gross/net heat of steam and hot water. Vortex flow meter usually monitor the compressor output and evaluation of Free Air Delivery (FAD) There has lots of Industrial gases, such as natural gas, nitrogen gas, liquefied gases, flue gases, carbon dioxide etc, all could use vortex flow meter. In many factories, compressed air monitoring is very important, vortex flow meter also could use for process control. Besides the different gases measurement, vortex flow meter could also used for light oil or any purified water，such as thermal oils, Desalinated water, demineralized water, RO water, boiler feed water, condensate water etc.    In the Chemicals and petrochemicals industries, there also has lots of gases or liquid could use vortex flow meter for monitoring. Installation :- Vortex Flow Meter Installation Requirements The installation of vortex flow meter has higher requirements, to guarantee the better accuracy and working properly. Vortex flow meter installation should keep away from the electric motors, big frequency converter, power cable, transformers, etc. Do not install in the position where there has bends, valves, fittings, pumps etc, which could cause flow disturbances and influence the measurement.   The front straight pipe line and after straight pipe line should follow below suggestion. https://www.cbroinstruments.com/turbine-flow-meters.htm https://www.cbroinstruments.com/turbine-flow-meters.htm Flow Meter Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/liquid-turbine-flow-meter.htm https://www.cbroinstruments.com/liquid-turbine-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 CBRO  Liquid Turbine Flow Meter is internally developed and perfected by CBRO Instrument. Over the years, CBRO Liquid Turbine Flow Meter has been commissioned in many parts of the world, received praise from end-users and industrial leaders. CBRO Instrument Turbine Flow Meter offers two accuracy classes, 0.5%R and 0.2%R. Its simple structure allows a small pressure loss and virtually no maintenance requirements. Our users can select the preferred converter type depending on the commissioning environment.  Advantages :-  Liquid Turbine Flow Meter Advantages and Disadvantages CBRO strives to provide high-quality products with economical cost.  CBRO Liquid Turbine Flow Meter applies to viscous fluids, non-conductive fluids, solvents, liquefied gases and high-pressure applications.  CBRO Instrument Liquid Turbine Flow Meter provides high accuracy of 0.2% R and a wide range of applications to non-conductive liquids, such as fuel oil, ultrapure water and gasoline. These make the turbine meter more popular compare to Electromagnetic Flow Meter in the oil industry, purifying process and distilleries.     The Flange type connection Turbine Flow Meter is known for its application in oil & gas industry.  It is compatibility with high temperature/pressure pipe and high durability makes it the most popular flow instrument in oil and gas industry. Application :-  Liquid Turbine Flow Meter Applications CBRO Instrument Liquid Turbine Flow Meters offers both standard SS304 body and SS316 body.  Because of its wide working temperature and pressure range, it is capable of measuring various mediums and commissioning into extreme working conditions.  CBRO Instrument Liquid Flow Turbine Meters are popular in the Oil & Gas industry, Chemical industry, and Water industry. The Flange connection version is compatible with High pressure/temperature commission sites. It is the most popular meter in upstream oil production and transportation, off-shore exploration, water supply, and much more.  Due to its high accuracy and fast response time, CBRO Instrument Liquid Turbine is often integrated into the Industrial Internet of Things, together with valves and pumps to achieve smart process control, for example, solvents batching, blending, storage and off-loading systems. Kindly contact our sales engineers if there are questions related to integrating CBRO Liquid Turbine Meters into your existing plant IOT. Measurement/Control Batching Application/ Flow rate Comparator (Inlet V/s Outlet)/ Dosing Application.     Application Areas :-  Chemical Industries/ Pharmaceutical Industries Food & Sugar Industries Textile Industries Ceramic Industries/ Paper Mills Industrial R.O. /Water supply schemes     Various Modes :-  Indicator & Totalizer : The meter is in flow indication mode with showing totalizer in display in order to monitor current flow. Batcher : Relay will energize after a pressing start button and remains energized till fixed quantity of liquid passes through the sensor. The batcher has a halt and reject batch function. Flow Comparator : The meter has two sensors for permeate and reject line. The meter displays both the flow rates and calculates percentage recovery also gives alarm on reducing rate of recovery. Rate Switch Mode : The relay has  programmed to get energized whenever actual flow falls/rise the set value. Display shows “LOW/HIGHFLOW RATE”. Ideal f or flow interlock, chemical dosing. Pulser : To operate specific task on completion of prefix volume. Meter can configure to any metering /dosing pump.     Features :- Each fitting individually calibrated and marked with K factor. (ml/pulse) Ceramic ball bearing for superior low flow performance. High level (5VDC) signal can be sets up to 100ft. without transmitter. For best results we recommend to provide a straight run of 10 and 5D on the upstream and downstream respectively. Insertion type sensor also available with solvent cementable adaptors for PVC tees at extra cost. Fitting automatically since probe sent at correct depth and orientation. Important Tips   Electro-magnetic flow meters suffer from the drawback that the flowing media or liquid must be conductive in nature, whereas such is not the case with Turbine Flow meter, which provides excellent performance even in non-conductive liquids like kerosene, petroleum, vegetable oil etc Installation :-  Liquid Turbine Flow Meter Installation and Maintenance Before the installation, it is crucial to communicate with our sales engineers regarding the working conditions and medium the meter designs to measure.  The installation of the Q&T Flange Type Liquid Turbine Flow Meter involves minimal effort. During installation, the users will need bolts, nuts, washers and appropriate tools for installation. The user needs to keep in mind these three factors while carrying out the installation.  1. There should be at least ten pipe diameter lengths of straight pipe upstream of the Turbine Meter and five pipe diameter length of straight pipe length downstream of the Turbine Meter, with the same nominal diameter size.  2. Valves and Throttling devices needed to install downstream of the flow meter.  3. The arrow indicated on the meter body is the same as the actual flow.   If there are specific questions regarding the installation of the Q&T Instrument Turbine Meter, kindly contact our sales engineers for assistance.  https://www.cbroinstruments.com/gas-turbine-flow-meter.htm https://www.cbroinstruments.com/gas-turbine-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 CBRO series gas turbine flow meter is a new generation of high-precision and high-reliability gas precision measuring instrument, which is based on the advanced technology of flow meters domestic and abroad. It has excellent low-pressure and high-pressure metering performance, various signal output modes and low sensitivity to fluid disturbance. It is widely used for natural gas, coal-based gas, liquefied gas and other gases application. Advantages :- Gas Turbine Flow Meter Advantages and Disadvantages Gas turbine flow meter is with advanced rectification technology and dust-proof structure. It is with built-in temperature and pressure sensors which can achieve automatically compensation to make sure high accuracy. Gas turbine flow meter provides good solution for custody transfer between parties.   Compared with precession vortex flow meter, gas turbine flow meter is with low pressure loss, low initiating flow and wider measurement range. The display of gas turbine flow meter support to rotate 350°, easy to read data in different directions. Application Areas:-  Chemical Industries/ Pharmaceutical Industries Food & Sugar Industries Textile Industries Ceramic Industries/ Paper Mills Industrial R.O. /Water supply schemes Various Modes :-  Indicator & Totalizer : The meter is in flow indication mode with showing totalizer in display in order to monitor current flow. Batcher : Relay will energize after a pressing start button and remains energized till fixed quantity of liquid passes through the sensor. The batcher has a halt and reject batch function. Flow Comparator : The meter has two sensors for permeate and reject line. The meter displays both the flow rates and calculates percentage recovery also gives alarm on reducing rate of recovery. Rate Switch Mode : The relay has  programmed to get energized whenever actual flow falls/rise the set value. Display shows “LOW/HIGHFLOW RATE”. Ideal f or flow interlock, chemical dosing. Pulser : To operate specific task on completion of prefix volume. Meter can configure to any metering /dosing pump.   Features :-  Each fitting individually calibrated and marked with K factor. (ml/pulse) Ceramic ball bearing for superior low flow performance. High level (5VDC) signal can be sets up to 100ft. without transmitter. For best results we recommend to provide a straight run of 10 and 5D on the upstream and downstream respectively. Insertion type sensor also available with solvent cementable adaptors for PVC tees at extra cost. Fitting automatically since probe sent at correct depth and orientation. Important Tips :-  Electro-magnetic flow meters suffer from the drawback that the flowing media or liquid must be conductive in nature, whereas such is not the case with Turbine Flow meter, which provides excellent performance even in non-conductive liquids like kerosene, petroleum, vegetable oil etc   https://www.cbroinstruments.com/thread-turbine-flow-meter.htm https://www.cbroinstruments.com/thread-turbine-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 CBRO  Liquid Turbine Flow Meter is internally developed and perfected by CBRO Instrument. Over the years, CBRO Liquid Turbine Flow Meter has been commissioned in many parts of the world, received praise from end-users and industrial leaders. CBRO Instrument Turbine Flow Meter offers two accuracy classes, 0.5%R and 0.2%R. Its simple structure allows a small pressure loss and virtually no maintenance requirements. The Thread Connection Turbine Flow Meter offers two types of converter options, Compact Type and Remote Type. Our users can select the preferred converter type depending on the commissioning environment.  Advantages:-  Thread Turbine Flow Meter Advantages CBRO strives to provide high-quality products with economical cost. CBRO Instrument Liquid Turbine Meter provides high accuracy of 0.2% R and a wide range of applications to non-conductive liquids, such as fuel oil, ultrapure water and gasoline. These make the turbine meter more popular compare to Electromagnetic Flow Meter in the oil industry, purifying process and distilleries.  The CBRO Instrument meter also has an amazingly wide turndown ratio of 20:1, combined  operate reliably in both high and low flow rates and produce excellent repeatability as low as 0.05%.   The Thread connection Turbine Flow Meter is known for its application to smaller pipe sizes. limited installation space, Thread connection Turbine Flow Meter is always preferred over Flanged connection and Tri-Clamp connection Turbine Meters. Application:-  Thread Turbine Flow Meter Applications CBRO Instrument Liquid Turbine Meters offers both standard SS304 body and SS316 body.  Because of its wide working temperature and pressure range, it is capable of measuring various mediums and commissioning into extreme working conditions. CBRO Instrument Liquid Turbine Meters are popular in the Oil & Gas industry, Chemical industry, and Water industry. The Thread connection version is designed exclusively for smaller size pipes. Our standard size range for Thread Connection Turbine meter is from DN4~DN100.   Due to its high accuracy and fast response time, CBRO Instrument Liquid Turbine is often integrated into the Industrial Internet of Things, together with valves and pumps to achieve smart process control, for example, solvents batching, blending, storage and off-loading systems. Kindly contact our sales engineers if there are questions related to integrating CBRO Liquid Turbine Meters into your existing plant IOT. Installation :-  Tri-Clamp Turbine Flow Meter Installation and Maintenance Before the installation, it is crucial to communicate with our sales engineers regarding the working conditions and medium the meter designs to measure. The installation of the Q&T Tri-Clamp Liquid Turbine Meter involves minimal effort. Comes with the product, users will receive a pair of clamps. During installation, the users will not need additional tools for Tri-Clamp type Turbine Flow Meter. The user needs to keep in mind these three factors while carrying out the installation. 1. There should be at least ten pipe diameter lengths of straight pipe upstream of the Turbine Meter and five pipe diameter length of straight pipe length downstream of the Turbine Meter, with the same nominal diameter size. 2. Valves and Throttling devices needed to install downstream of the flow meter. 3. The arrow indicated on the meter body is the same as the actual flow. If there are specific questions regarding the installation of the Q&T Instrument Turbine Meter, kindly contact our sales engineers for assistance.     https://www.cbroinstruments.com/paddle-wheel-flow-meter.htm https://www.cbroinstruments.com/paddle-wheel-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Paddle Wheel Flow Meter, which is easy to operate and gives accurate and reliable measuring of flow. The flow and the revolutions of the paddle wheel are proportional to each other. Thus, by spinning the paddle wheel with the force from the flowing fluid, it becomes possible to measure the rate of this flow from the number of revolutions. A paddle wheel  flow meter is used for volumetric total flow and/or flow rate measurement since it has a relatively simple working principle. When fluid flows through the turbine meter, it impinges upon turbine blades that are free to rotate about an axis along the center line of the turbine housing. The angular (rotational) velocity of the turbine rotor is directly proportional to the fluid velocity flowing through the turbine. Features:- High Accuracy in Low cost Robust Design Easy Installation Line Size from 25 NB Wide application because it has 6 different modes. 4-20 mA output RS485 Modbus   Application Chemical Industries/ Pharmaceutical Industries Food & Sugar Industries Textile Industries Ceramic Industries/ Paper Mills Industrial R.O. /Water supply schemes   Various Modes :-  Indicator & Totalizer : The meter is in flow indication mode with showing totalizer in display in order to monitor current flow. Batcher : Relay will energize after a pressing start button and remains energized till fixed quantity of liquid passes through the sensor. The batcher has a halt and reject batch function. Flow Comparator : The meter has two sensors for permeate and reject line. The meter displays both the flow rates and calculates percentage recovery also gives alarm on reducing rate of recovery. Rate Switch Mode : The relay has programmed a way to get energize whenever actual flow falls/rise the set value. Display shows “LOW/HIGH FLOW RATE”. Ideal f or flow interlock, chemical dosing. Pulser : To operate specific task on completion of prefix volume. Meter can configure to any metering /dosing pump. Dual Totalizer: It’s a 2nd totalizer. It can be used regardless of totalizer 1 settings.   https://www.cbroinstruments.com/coriolis-mass-flow-meter.htm https://www.cbroinstruments.com/coriolis-mass-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 CMF250-20 Series Coriolis mass flow meter is designed according to micro motion and Coriolis principle. It is a leading precision flow and density measurement solution offering . The Coriolis flow meter worked on the Coriolis effect and was named. Coriolis flow meters are considered to be true mass flow meters because they tend to measure mass flow directly, while other flow meter techniques measure volume flow. Advantages :-  Coriolis Type Flow Meter Advantages It has high measurement accuracy, standard accuracy 0.2%; And the measurement is not affected by the physical properties of the medium. Coriolis type flow meter provide a direct mass flow measurement without the addition of external measurement instruments. While the volumetric flow rate of the fluid will vary with changes in density, the mass flow rate of fluid is independent changes.   Flow meters are operated by flow characteristics such as turbulence and flow distribution. Therefore, upstream and downstream direct pipe operating  flow regulation requirements are not required. Application :-  ● Petroleum, such as crude oil, coal slurry, lubricant and other fuels. ● High viscosity materials, such as asphalt, heavy oil and grease; ● Suspended and solid particulate matter materials, such as cement slurry and lime slurry; ● Easy-to-solidified materials, such as asphalt ● Accurate measurement of medium- and high-pressure gases, such as CNG oil and gas   ● Micro-flow measurements, such as fine chemical and pharmaceutical industries; Installation :-  Coriolis Mass Flow Meter Installation 1. Basic Requirements on installation (1)Flow direction should be in accordance with PHCMF sensor flow arrow.  (2)Properly supporting is required for preventing tubes vibrating. (3)If a strong pipeline vibration is inevitable, it is recommended to use a flexible tube to isolate the sensor from the pipe. (4)Flanges should be kept parallel and their center points should be located on the same axis to avoid subsidiary force generation. (5)Installation vertically, make the flow from the bottom up when measuring, meanwhile, the meter should not be installed on the top to prevent air getting trapped inside the tubes. 2.Installation Direction   In order to ensure the reliability of the measurement, the ways of installation should consider the following factors https://www.cbroinstruments.com/thermal-mass-flow-meters.htm https://www.cbroinstruments.com/thermal-mass-flow-meters.htm Flow Meter Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/thermal-mass-flow-meter.htm https://www.cbroinstruments.com/thermal-mass-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Flange thermal gas mass flow meter is one of kind mass flow meter which Is popular in industrial applications is the way they are designed and built. The feature is no moving parts, nearly unobstructed straight through flow path, require no temperature or pressure corrections and retain accuracy over a wide range of flow rates. Straight pipe runs can be reduced by using dual-plate flow conditioning elements and installation is very simple with minimal pipe intrusions. Flange thermal gas mass flow meter size from DN10~DN2000mm Advantages :-  Flange thermal gas mass flow meter advantanges : (1)Wide range ratio 1000:1; (2)Large diameter, low flow rate, negligible pressure loss; (3)Direct mass flow measurement without temperature and pressure compensation; (4)Very sensitive for low flow rate measurement; (5)Easy to design and select, easy to install and use; (6)Suitable for all kinds of single or mixed gas flow measurement Could measure gas with flow velocity from 100Nm/s to 0.1Nm/s, which can be used for gas leak detection;   (7) No pressure loss or very small pressure loss. Application :-  Flange thermal gas mass flow meter application:   Thermal gas air flow meter widely use for Electric power, Petrochemical industry, Glass, Ceramics and Building materials industry, and mainly be used to meausre Dry gas, such as Air, Natural gas, LPG gas, Biogas, ect. But thermal gas mass flow couldn’d be used to measure Vapour, Humidity gas and Ethyne. Installation :-  nge thermal gas mass flow meter installation: ① Observe the recommended inlet and outlet requirements. ② Good engineering practice is necessary for the associated pipe work and installation. ③ Ensure correct alignment and orientation of the sensor. ④ Take measures to reduce or avoid condensation (e.g. install a condensation trap, thermal insulation, etc.). ⑤ The maximum permitted ambient temperatures and the medium temperature range must be observed. ⑥ Install the transmitter in a shaded location or use a protective sun shield. ⑦ For mechanical reasons, and in order to protect the pipe, it is advisable to support heavy sensors. ⑧ No installation in where large vibration exists ⑨ No exposure in the environment containing a lot of corrosive gas ⑩ No sharing power supply with frequency converter, electric welding machine and other machines which can make power-line interference.   Daily maintenance for flange thermal gas mass flow meter:   In the daily operation of the thermal gas mass flowmeter, check and clean the flowmeter, tighten the loose parts, find and deal with the abnormality of the flowmeter in operation in time, ensure the normal operation of the flowmeter, reduce and delay the wear of components, Extend the service life of the flowmeter. Some flowmeters will become fouling after being used for a period of time, and it must be cleaned by pickling etc. depending on the degree of fouling https://www.cbroinstruments.com/insertion-thermal-mass-flow-meter.htm https://www.cbroinstruments.com/insertion-thermal-mass-flow-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Insertion type thermal gas mass flow meter is one of kind mass flow meter which. Is popular in industrial applications is the way they are designed and built. The feature is no moving parts, nearly unobstructed straight through flow path, require no temperature or pressure corrections and retain accuracy over a wide range of flow rates. Straight pipe runs can be reduced by using dual-plate flow conditioning elements and installation is very simple with minimal pipe intrusions. Insertion type thermal gas mass flow meter size from DN40~DN2000mm. Advantages :-  Insertion type thermal gas mass flow meter advantanges : (1)Wide range ratio 1000:1; (2)Large diameter, low flow rate, negligible pressure loss; (3)Direct mass flow measurement without temperature and pressure compensation; (4)Very sensitive for low flow rate measurement; (5)Easy to design and select, easy to install and use; (6)Suitable for all kinds of single or mixed gas flow measurement Could measure gas with flow velocity from 100Nm/s to 0.1Nm/s, which can be used for gas leak detection;   (7) No pressure loss or very small pressure loss. Application :-  Insertion type thermal gas mass flow meter application: Thermal gas air flow meter widely use for Electric power,water treatment,Petrochemical industry,Glass,Ceramics and Building materials industry,and mainly be used to meausre Dry gas,such as Air,Natural gas,LPG gas,Biogas,ect.But thermal gas mass flow couldn’t be used to measure Vapour, Humidity gas and Ethyne. Installation :-  Insertion type thermal gas mass flow meter installation: ① Regardless of whether the flowmeter is installed vertically or horizontally, keep the flowmeter in a horizontal state. ② In situations where accidental gas stop or accidental gas stop will inevitably cause major irreversible losses, bypass must be installed. ③ There should be at least a 10D straight pipe section in the front of the flowmeter and a 5D (D is the pipe diameter) straight pipe section at the rear. ④ If the instrument is installed outdoors, a sunshade should be added to avoid the sun and rain. ⑤ Make sure that there is no strong magnetic field, strong electric field and strong mechanical vibration near the flowmeter. ⑥ The static grounding of the flowmeter should be reliable, but it cannot be shared with strong current grounding. ⑦ The surrounding environment should confirm that there is no corrosive effect on aluminum alloy. ⑧ Ensure that the gas flow direction is consistent with the arrow direction on the flowmeter. ⑨ Welding operations are prohibited in an explosive environment.   Insertion type thermal gas mass flow meter maintenance:   In the daily operation of the thermal gas mass flowmeter, check and clean the flowmeter, tighten the loose parts, find and deal with the abnormality of the flowmeter in operation in time, ensure the normal operation of the flowmeter, reduce and delay the wear of components, Extend the service life of the flowmeter. Some flowmeters will become fouling after being used for a period of time, and it must be cleaned by pickling etc. depending on the degree of fouling   https://www.cbroinstruments.com/vibrating-fork-level-switch.htm https://www.cbroinstruments.com/vibrating-fork-level-switch.htm Tue, 12 Aug 2025 00:00:00 +0530 The working principle of vibrating fork level switch is based on vibrating tuning fork’s natural frequency and amplitude measurement. A specially shaped tuning fork is continuously vibrating at its natural frequency using piezo-electric elements and changes in amplitude in the presence of application media are measured. The pressure applied on diaphragm drives the vibrating fork’s tines apart from each other and return to their original position when the pressure is removed. As the material level increases and comes in contact with the vibrating fork tines, the amplitude of oscillation of vibrating fork level switch dampens or decreases as it covered with the solid application media. The change in amplitude is detected by the microprocessor leading to a switching decision. When the amplitude goes below a set threshold, vibrating fork type level switch trigger changes in output Product Features :-  Compact vibrating fork level switch for free-flowing solids, granules and powders Universal Power Supply: 18 – 55V DC & 90 – 265V AC Application Temperature Range : up to 200° C Outputs: DPDT Relay, Open Collector PNP Output Process Connection: Threads and Flanges Polished & hygienic fork Shorter Probe Length Fast Switching: 0.5s & 0.8s options available Certifications: Flame Proof Housing IIC, IP-68 Housing   Technical Data :-  ●Power supply: 24VDC (standard); 220VAC (optional) ●Ambient temperature: -20℃～70℃ ●Medium temperature: -40℃～150, high temperature optional ●Media density: minimum 0.6g/cm3 ●Process connection: thread, chuck or flange ●Output mode: SPDT 220VAC/24VDC 4A relay (10A optional) or RS485 bus communication mode ●Working pressure: ≤2MPa or ≤6.4Mpa ●High and low alarm: can be set to high or low alarm ●Delay: 1～30s (For longer time, please specify when ordering) ●Shell protection: IP65 or above ●Power consumption: 3W ●Electrical interface: M20*1.5 other optional ●Instrument internal circuit anti-surge voltage: 1500VAC   https://www.cbroinstruments.com/digital-water-level-recorder.htm https://www.cbroinstruments.com/digital-water-level-recorder.htm Tue, 12 Aug 2025 00:00:00 +0530 Piezometer | Digital Water Level Recorder (DWLR) MODEL: PM2050CBRO offers CGWA compliance Digital Water Level Recorder(DWLR) / Piezometer with telemetry or non-telemetry system. It measures borewell water levels. Features:- Easy to Install IP 68 Sensor IP 66 Display Enclosure Inbuilt Telemetry System Universal Power Supply (85-300 VAC / 24 VDC) Cable length as per requirement High Accuracy   https://www.cbroinstruments.com/dpt-level-transmitter.htm https://www.cbroinstruments.com/dpt-level-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 DPT Type Level Transmitter MODEL: DPL4300 Differential Pressure (DP) Level Measurement uses pressure readings and specific gravity to output level. DP Level is a common measurement technique that is used in a wide variety of applications. Solutions include standard transmitter connections and integrated transmitters with direct or remote mount seals that can be configured in tuned, balanced, and electronic systems. Features :-  Ultra, ultra for flow, and classic performance Gauge, differential or absolute measurements Remote Display and Interface options Zero and span adjustment.   https://www.cbroinstruments.com/radar-level-meters.htm https://www.cbroinstruments.com/radar-level-meters.htm Level Transmitters Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/ultrasonic-level-meters.htm https://www.cbroinstruments.com/ultrasonic-level-meters.htm Level Transmitters Tue, 01 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/80g-radar-level-meter.htm https://www.cbroinstruments.com/80g-radar-level-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 80G Radar Level Meter MODEL: RLT1600A 80G Radar Level Meter frequency modulation wave FMCW radar product (also called millimeter wave radar), it uses a millimeter wave band with high frequency, it can detect smaller targets and achieve more precise positioning than microwave radar with higher resolution and stronger confidentiality. Therefore, it has important applications in long-distance target detection, strong smoke and dust environment, long-distance imaging, multi-spectral imaging, etc.  Advantages :- (1)Based on self-developed millimeter-wave radio frequency chip to achieve a more compact radio frequency architecture; (2) Higher signal-to-noise ratio, almost unaffected by level fluctuations; (3) The measurement accuracy is millimeter-level accuracy (1mm), which can be used for metrology-level measurement; (4) The measurement blind area is small (3cm), and the effect of measuring the liquid level of small storage tanks is better; (5) The beam angle can reach 3°, and the energy is more focused, effectively avoiding false echo interference; (6) High frequency signal, can effectively measure the level of medium with low dielectric constant (ε≥1.5);   (7) Strong anti-interference, almost unaffected by dust, steam, temperature and pressure changes; Application :-  Measure the level of solid particles, chemical liquid tank, oil tank and process containers. 1.Radar level meter is working based on electromagnetic wave. So it could have max 120m measure range. 2.Compared with other type level meter, 80G radar level meter could measure different kinds of oil, chemical liquids, solid powder,and many other mediums. 3. 80G radar level meter could work in harsh working condition. It won’t be affected by temperature, pressure and humidity. With PTFE horn, it even could work in corrosive condition, such as acid liquid.   4.Customer also could choose different connection methods, such as flange, thread, bracket. https://www.cbroinstruments.com/902-radar-level-meter.htm https://www.cbroinstruments.com/902-radar-level-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 902 Radar Level Meter MODEL: RLT1600B 902 radar level meter has the advantages of low maintenance, high performance, high precision, high reliability, and long service life. Compared with ultrasonic level meter, heavy hammer and other contact instruments, the transmission of microwave signals is not affected by the atmosphere, so it can meet the harsh environment requirements of volatile gases, high temperature, high pressure, steam, vacuum and high dust in the process. This product is suitable for harsh environments such as high temperature, high pressure, vacuum, steam, high dust and volatile gas, and can continuously measure different material levels. Advantages :- Radar Level Meter Advantages and Disadvantages 1. Using 26GHz high-frequency transmitting frequency, the beam angle is small, the energy is concentrated, and it has stronger anti-interference ability, which greatly improves the measurement accuracy and reliability; 2. The antenna is small in size, easy to install, and has a variety of sizes to choose from, suitable for different measuring ranges; 3. The wavelength is shorter, which has a better effect on inclined solid surfaces; 4. The measurement blind area is smaller, and good results can be obtained for small tank measurement; 5. Hardly affected by corrosion and foam;   6. Almost unaffected by changes in water vapor, temperature and pressure in the atmosphere; Application :- Measurement of solid particles, chemical liquid tank, oil tank and process containers. 1.Radar level meter is working based on electromagnetic wave. So it could have max 70m measure range and with stable working. 2.Compared with ultrasonic level meter, radar level meter could measure different kinds of liquids, powder, dust, and many other mediums. 3.Radar level meter could work in harsh working condition. It won’t be affected by temperature, pressure and humidity. With PTFE horn, it even could work in corrosive condition, such as acid.   4.Customer also could choose different connection methods, such as flange, thread, bracket. The level meter’s material is SS304. SS316 material is optional. https://www.cbroinstruments.com/901-radar-level-meter.htm https://www.cbroinstruments.com/901-radar-level-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 901 Radar Level Meter MODEL: RLT1600C 901 radar level meter is one type of high frequency level meter. This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 10 meters. The sensor material is PTFE, so it could work well in corrosive tank, such as acid or alkaline liquid. Radar Level Meter Working Principle: An extremely small 26GHz radar signal emitted in short pulse form from the antenna end of the radar level gauge. The radar pulse is reflected by the sensor environment and the surface of the object and is received by the antenna as a radar echo. The rotation period of the radar pulse from emission to reception is proportional to the distance. Advantages :-  Radar Level Meter Advantages and Disadvantages 1. The integrated anti-corrosion outer cover structure effectively prevents the corrosive medium from contacting the probe, with excellent anti-corrosion performance, suitable for the measurement of corrosive medium; 2. It adopts advanced microprocessor and echo processing technology, which not only enhances the echo ability, but also helps to avoid interference.  3. Using 26GHz high-frequency transmitting frequency, small beam angle, concentrated energy, stronger anti-interference ability, greatly improved measurement accuracy and reliability;   4. Compared with the low-frequency radar level gauge, the measurement blind area is smaller, and good results can be small tank measurement; 5. It is almost free from corrosion and foam; https://www.cbroinstruments.com/pressure-transmitter.htm https://www.cbroinstruments.com/pressure-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 Adopts stainless steel shell structure, built in stainless steel oil filled sensor, intelligent digital circuit with precise temperature characteristic compensation, it can be used reliably and stably. It is suitable for gas, liquid, steam pressure measurement and pressure measurement with corrosive media, it can also be used for level measurement. Introduction :-   Process pressure measurement in measurement and control technology   System pressure monitoring in liquids and gases, e.g., for leakage detection   Pressure control for power control of pumps   Indirect measurement of process-relevant metrics such as level, density, flow, or steam temperature   Vacuum control in de-aerators   https://www.cbroinstruments.com/smart-type-pressure-transmitter.htm https://www.cbroinstruments.com/smart-type-pressure-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 The with HART protocol converts input pressure signals into 4 to 20mA analogue output signal. The SE62H can be programmed via three buttons alternatively through PC. Following parameters can be adjusted : Zero, Span, Decimal Point, Damping, Display Mode, Restore Data and so on. For parameter setting and visualization of measured value, liquid crystal displays with backlit is available. The transmitter is protected against wrong wiring and transient over voltages. Features :-   Ultra, ultra for flow, and classic performance   Gauge, differential or absolute measurements   Remote Display and Interface options   Zero and span adjustment   https://www.cbroinstruments.com/temperature-transmitters.htm https://www.cbroinstruments.com/temperature-transmitters.htm Wed, 02 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/pt100-temperature-transmitter.htm https://www.cbroinstruments.com/pt100-temperature-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 Pt100 Temperature Transmitter MODEL: DTT500 1. Use Pt100 or other thermal resistors as sensing element. 2. High accuracy, low power consumption, wide operating ambient temperature range. 3. Integrated construction, easy installation. 4. Use full metal sealed construction, coordinate high temperature radiation trough. Introduction   DTT500 Pt100 temperature transmitter uses Pt100 thermal resistor as sensing element. The thermal resistor transforms the measured temperature into electrical signal, after this signal is processed, it will be amplified to 4~20mA or other standard simulated signals on industry scene.  UTB3 is made with integrated construction for the direct measurement of various of liquid, gas and solid’s surface temperature in the range of -200~500℃.  good ability on anti-shock and withstand high temperature, also have high mechanical strength , is suitable for the application in bad working condition. Features :- ◆Use Pt100 or other thermal resistors as sensing element. ◆High accuracy; low power consumption wide; operating ambient temperature range. ◆Integrated construction, easy installation.   ◆Use full metal sealed construction, coordinate high temperature radiation trough. https://www.cbroinstruments.com/4-20ma-temperature-transmitter.htm https://www.cbroinstruments.com/4-20ma-temperature-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 4-20mA Temperature Transmitter MODEL: DTT200S DTT200S integrated 4-20mA temperature transmitter thermocouple or thermal resistor as temperature sensitive element, it can measure temperature of all kinds of liquid, steam and gas medium from -200 to 1600℃, and transform thermocouple’s or thermal resistance’s signal to 4~20mA standard signal, simultaneously has real-time indication function on the spot. UTB9 integrated 4-20mA temperature transmitter has LCD or LED display.  Features :- ◆Range: -200 ~1600℃; ◆High accuracy, anti-interference, good long-term stability;   ◆Integrated structure, can display its real-time measuring value. https://www.cbroinstruments.com/digital-temperature-gauge.htm https://www.cbroinstruments.com/digital-temperature-gauge.htm Tue, 12 Aug 2025 00:00:00 +0530 Digital Temperature Gauge MODEL: DTG880 1. Big LCD screen display, dial 100mm, high resolution; 2. Temperature percentage dynamic demonstration (progress strip demonstration); 3. 1~15min automatic turn-off function; 4. 5 selectable engineering units:℃, F,K,Ra,Re; 5. Micro power loss function, above 2 years in the electricity saving patt; 6. Back light design, can see the reading easily in the dark. 7. keep peak value function, can record the max temperature reading during process sampling speed: 1time/ sec. Description :- DTG880 digital temperature gauge is designed with whole electronic structure, it uses 3.6V high performance lithium battery as power supply. The display of DTG880 is 5-digit LCD, with high resolution and no reading error. With Pt100 resistor as sensing element, DTG880 can measure and display the medium temperature precisely. The installation of DTG880 is very easy and simple.   DTG880 digital temperature gauge is widely used in such industries as water and electricity, chemical, and machinery, for the measurement and demonstration of fluid medium’s temperature. Features :- ◆big LCD screen display, dial 100mm, high resolution; ◆Temperature percentage dynamic demonstration (progress strip demonstration); ◆1~15min automatic turn-off function; ◆5 selectable engineering units:℃, F,K,Ra,Re; ◆Micro power loss function, can work above 2 years in the electricity saving patt; ◆back light design, can see the reading easily in the dark.   ◆keep peak value function, can record the max temperature reading during process sampling speed: 1time/ sec. https://www.cbroinstruments.com/multi-parameter-transmitter.htm https://www.cbroinstruments.com/multi-parameter-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 Multi Parameter Transmitter MODEL: MPT700 CBRO muti-parameter water analyzer max 7 sensors could be connected. It can be widely used in tap water, sewage, and surface water. , Groundwater, aquaculture, industrial processes, smart water and other fields.  Measurement Principle:- MPT-700 multi-parameter transmitter can simultaneously monitor multiple different parameters according to different needs of customers, including temperature / PH / ORP / conductance / dissolved oxygen / turbidity / sludge concentration / chlorophyll / Blue-green algae / UVCOD / ammonia nitrogen and so on. The transmitter has a data storage function, and the user can also realize 4-20 mA analog output through interface configuration and calibration of the transmitter; realize relay control and digital communication.functions. Up to 7 sensor could be connected. Features:- 1.Up to 7 sensors could be connected to improve integration and reduce operation and maintenance costs. 2. Universal, all digital sensor interfaces are common, analog sensors can be configured according to different sensor types 3. Quick plug and work, electrode installation and replacement is quick and convenient. 4. Easy use and reliable results, interface operation instructions can reduce operational errors.   5. With 4~20mA, MODBUS RS485 multiple data output modes. Applications:- 1.Online monitoring of multi-parameter water quality in surface water, drinking water sources and aquaculture; 2. Online monitoring of water quality in wastewater treatment plants and industrial sectors;   3. Marine sea water quality online monitoring. https://www.cbroinstruments.com/water-analysers.htm https://www.cbroinstruments.com/water-analysers.htm Wed, 02 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/digital-conductivity-meter.htm https://www.cbroinstruments.com/digital-conductivity-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 Conductivity Meter MODEL: CI880 TDS meter : CBRO Conductivity/TDS meter CI880 is designed to indicate five digit Conductivity/TDS value and temperature. It can accept direct Conductivity/TDS of any make Sensor and RTD Pt.100 or 4-20madc as temperature input signal. The Conductivity/TDS resolution is 0.00 to 20.00,0.0 to 2000.0,0-20000 uS and temperature resolution is 100.0 degc. It can generate two relay output on Conductivity/TDS and two relay on temperature value. It can generate isolated analog output as retransmission for conductivity/TDS and temperature input. It also provides computer connectivity port on Modbus protocol or GPRS connectivity as an optional has facility for auto or manual temperature compensation. It is having on field calibration facility to acquire better accuracy. They are very reliable, accurate employing the latest technology. They undergo stringent tests to assure quality performance. The instrument is available in a panel mounted housing which requires a cut out of 92mm(W) x 92 mm(H) x 85 (D)mm. A variety of power supply options are available for this. Features :- Graphical display with easy-to-read ,Conductivity / TDS Temperature, RTC, Tag no., Unit. Auto Compensation to Temperature. Compatible to all Conductivity/TDS Electrode. Force manual temperature in case of temperature sensor fail. Alarm for Conductivity/TDS /Temperature.     APPLICATIONS :- Process Industries ETP Plant Chemical Pharmaceutical Pulp and Paper Wastewater   https://www.cbroinstruments.com/orp-water-analyzer.htm https://www.cbroinstruments.com/orp-water-analyzer.htm Tue, 12 Aug 2025 00:00:00 +0530 ORP Analyzer MODEL: CI1600 ORP amalyzer : CBRO make PH/ORP Analyzer is design to measure, control and log the data of PH/ORP with real time in external device as an optional feature. It’s Having auto/manual selection facility for Temperature input Selection. It’s having Graphical LCD (64*128 Pixel Blue light )for display with inbuilt RTC, Tag No.,configuration along with PH/ORP ,Temperature value. It can generate isolated analog output 4-20mADC,Relay,Rs485 Modbus, GSM/GPRS connectivity as an optional features. All components used are industrial grade with conformal spray for anti corrosion in harsh environment. It’s available in BNC  connector compatible to all variety of pH/ORP Electrode. Features :- Graphical display with easy-to-read pH/ORP, Temperature, RTC, Tag no., Unit For better Accuracy 3 point calibration Auto Compensation to Temperature Compatible to all pH Electrode Force manual temperature in case of temperature sensor fail Alarm for pH/ORP/Temperature Compatible with GSM/GPRS System   Application:- Process Industries ETP Plant Chemical Pharmaceutical Pulp and Paper Wastewater   https://www.cbroinstruments.com/digital-ph-analyzer.htm https://www.cbroinstruments.com/digital-ph-analyzer.htm Tue, 12 Aug 2025 00:00:00 +0530 PH Analyzer MODEL: CI1600 ORP amalyzer : CBRO make PH/ORP Analyzer is design to measure, control and log the data of PH/ORP with real time in external device as an optional feature. It’s Having auto/manual selection facility for Temperature input Selection. It’s having Graphical LCD (64*128 Pixel Blue light )for display with inbuilt RTC, Tag No.,configuration along with PH/ORP ,Temperature value. It can generate isolated analog output 4-20mADC,Relay,Rs485 Modbus, GSM/GPRS connectivity as an optional features. All components used are industrial grade with conformal spray for anti corrosion in harsh environment. It’s available in BNC  connector compatible to all variety of pH/ORP Electrode. Features :- Graphical display with easy-to-read pH/ORP, Temperature, RTC, Tag no., Unit For better Accuracy 3 point calibration Auto Compensation to Temperature Compatible to all pH Electrode Force manual temperature in case of temperature sensor fail Alarm for pH/ORP/Temperature Compatible with GSM/GPRS System   https://www.cbroinstruments.com/cbro-digital-tds-meter.htm https://www.cbroinstruments.com/cbro-digital-tds-meter.htm Tue, 12 Aug 2025 00:00:00 +0530 TDS Meter MODEL: CI1600 TDS meter : CBRO Conductivity/TDS meter CI880 is designed to indicate five digit Conductivity/TDS value and temperature. It can accept direct Conductivity/TDS of any make Sensor and RTD Pt.100 or 4-20madc as temperature input signal. The Conductivity/TDS resolution is 0.00 to 20.00,0.0 to 2000.0,0-20000 uS and temperature resolution is 100.0 degc. It can generate two relay output on Conductivity/TDS and two relay on temperature value. It can generate isolated analog output as retransmission for conductivity/TDS and temperature input. It also provides computer connectivity port on Modbus protocol or GPRS connectivity as an optional has facility for auto or manual temperature compensation. It is having on field calibration facility to acquire better accuracy. They are very reliable, accurate employing the latest technology. They undergo stringent tests to assure quality performance. The instrument is available in a panel mounted housing which requires a cut out of 92mm(W) x 92 mm(H) x 85 (D)mm. A variety of power supply options are available for this. Features :- Graphical display with easy-to-read ,Conductivity / TDS Temperature, RTC, Tag no., Unit. Auto Compensation to Temperature. Compatible to all Conductivity/TDS Electrode. Force manual temperature in case of temperature sensor fail. Alarm for Conductivity/TDS /Temperature.   APPLICATIONS :- Process Industries ETP Plant Chemical Pharmaceutical Pulp and Paper Wastewater   https://www.cbroinstruments.com/effluent-quality-monitoring-system.htm https://www.cbroinstruments.com/effluent-quality-monitoring-system.htm Tue, 12 Aug 2025 00:00:00 +0530 EQMS MODEL: CI-EQMS9000 CBRO EQMS (Effluent Quality Monitoring System) analyser based on Ultraviolet/Visible (UV/Vis) absorption, found increasingly wide application in process industries. The spectrum of interest here extends from 200 nm to 750 nm. Direct absorbance for COD, BOD, TOC, NO3, COLOR, pH, TSS and Cr bring fast and stable measurements. This unique method allows measurements on extremely turbid or colored samples like Exceptional selectivity and no interference has never been reported after years of operation on many different applications. The patented flow cell allows very high level of solids without clogging. The turbidity is automatically compensated by a dual-wavelength method. Features :- The highly optimised design completely eliminates all moving parts in contact with the water as well as consumables, makes design pollution free, economical and user friendly. Full Spectrum UV – VIS Measurement & dual optical path design can automatically compensate the Turbidity in real time and eliminates the interference of Turbidity to the measurement, make the Analyzer more stable and reliable. Factory pre-calibrated, local multipoint calibration possible onsite. 7″ Touch Screen Graphical Display Interface with Live Value Monitoring and status information with user friendly design.   Automatic Calibration / Cleaning / Zeroing Functions ensure the optimum performance with minimum of manual intervention. Major Applications :- ✓ Plant treatment ✓ Water treatment ✓ Pharmaceutical applications ✓ Biological applications ✓ Fertilizer applications ✓ Boiler feed water ✓ Oxidizing applications ✓ Bilge water in ship applications ✓ Swimming pool applications ✓ Water quality monitoring ✓ Bleaching applications ✓ coloring applications   ✓ and many more https://www.cbroinstruments.com/clean-room-transmitters.htm https://www.cbroinstruments.com/clean-room-transmitters.htm Sat, 12 Jul 2025 00:00:00 +0530 https://www.cbroinstruments.com/dp-indicator-with-sensor.htm https://www.cbroinstruments.com/dp-indicator-with-sensor.htm Tue, 12 Aug 2025 00:00:00 +0530 ♦ LED Dis. :- 0.56 Or 1 Inch ♦ Built-in Or Remote Sensor ♦ Modbus RS-485 COM. ♦ HVAC (Heating, Ventilation, Air Conditioning, Cooling)-BMS ♦ Isolation Room Or OT Monitoring Applications.-EMS ♦ Clean Room Application In Pharmacy & Health Care. ♦ Data Acquisition, Analysis And Processing https://www.cbroinstruments.com/digital-differential-pressure-transmitter.htm https://www.cbroinstruments.com/digital-differential-pressure-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 FEATURE:-  ♦ Compact housing with IP 65 Protection Housing. ♦ Wide DP range ± 25Pa To 4000 mmWC. ♦ Re Ranging and calibrations can be done Thought Internal Keys and LED on site. ♦ +0.25 % Accuracy. ♦ Hi accuracy True-stable Digital Sensor, With Damping Facility. ♦ 4- 20 mA or 0 – 10 VDC Output available. https://www.cbroinstruments.com/rh-temperature-transmitter.htm https://www.cbroinstruments.com/rh-temperature-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 TEMP + RH TRANSMITTER ♦ Ventilating & Heating. ♦ Clean Room T Rh Monitoring ♦ Air Conditioning (HVAC) ♦ Gas Sterilizers Systems. ♦ Green House Monitoring ♦ Environmental Chamber. ♦ Duct Air Temp. Humidity Monitoring. ♦ Stability Sensor. TEMP + RH SENSOR ♦ Refrigeration ♦ Clean Room Monitoring. ♦ Steriliser, Humidity Chamber. ♦ Stability Chambers.   ♦ OEM Application https://www.cbroinstruments.com/humidity-and-temperature-transmitter.htm https://www.cbroinstruments.com/humidity-and-temperature-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 TEMP + RH TRANSMITTER ♦ Ventilating & Heating. ♦ Clean Room T Rh Monitoring ♦ Air Conditioning (HVAC) ♦ Gas Sterilizers Systems. ♦ Green House Monitoring ♦ Environmental Chamber. ♦ Duct Air Temp. Humidity Monitoring. ♦ Stability Sensor. https://www.cbroinstruments.com/digital-temperature-indicators.htm https://www.cbroinstruments.com/digital-temperature-indicators.htm Tue, 12 Aug 2025 00:00:00 +0530 TEMP INDICATOR_BASIC MODEL ♦ LED Dis. :- 0.56 Or 1 Inch ♦ Built-in Or Remote Sensor ♦ Modbus RS-485 COM. https://www.cbroinstruments.com/air-velocity-transmitter.htm https://www.cbroinstruments.com/air-velocity-transmitter.htm Tue, 12 Aug 2025 00:00:00 +0530 FEATURE:- ♦ USFDA 21 CFR Part 11 – GAMP-4 Compatible ♦ Isolated 2 X 4-20 mA DC Re-Transmission Output For Temp & RH. ♦ Micro Controller Based Temp. + Rh Indicator Controller In Single Enclosure. ♦ Highly Stable Temp.+ Rh Sensor Available With Different Mounting. ♦ Potential Free Relay Contact Output For Temp. And Rh Up To 4 Nos. ♦ Process Parameter High And Low LED Status Indication For Both Channels. ♦ MODBUS RTU Mul Drop RS-485 Serial Communication For PLC, SCADA Etc ♦ Password Protection For Calibration And Programming Mode. ♦ Software Base Calibraon For Both Channels. ♦ User Programmable Offset Correction. ♦ Sensor Accuracy : RH – 2% / 3% , Temp.- 025 % Of Span. ♦ Ex. Flameproof Model Available For Hazardous Applications. ♦ Wall Mounting/FLP And Duct Mounted Sensor Available. https://www.cbroinstruments.com/temp-rh-dp-time-indicator.htm https://www.cbroinstruments.com/temp-rh-dp-time-indicator.htm Tue, 12 Aug 2025 00:00:00 +0530 FEATURE ♦ Quick And Easy Mounting “1/4 Turn” System With Wall-Mount Plate. ♦ Temperature Compensation, Linear Adjustment Function. ♦ Switching Analogue Output By Dip Switch ♦ Offset Funcon By Button. ♦ 0-10 V Or 4-20 mA Output, Acve, Power Supply 24 V AC/ 12 V DC (3-4 Wires). ♦ Ranges From 0-5 M/S To 0-40 M/S And 0 To +50°C, -20 To +80°C, -50 To +50°C. ♦ ABS IP 65 Housing, With Or Without Display. ♦ Programmable Soware : Data Logger, Record, And Chart Analysis. https://www.cbroinstruments.com/industrial-vortex-flowmeter.htm https://www.cbroinstruments.com/industrial-vortex-flowmeter.htm Sat, 12 Jul 2025 00:00:00 +0530