Hi! Simply click below and type your query.
Our experts will reply you very soon.
Electromagnetic flow measurement has been in use around the world for 50 years and more, as witnessed by the popularity of these meters that continues unabated in virtually all sectors of industry. Electromagnetic Flowmeters can be used to measure all electrically conductive liquids (> 5 µS/cm) with or without solids, e.g. water, wastewater, sludge, slurries, pastes, acids, alkalis, juices, fruit pulp, etc.
CBRO DIGIMAG250 Full Bore Electromagnetic Flowmeter is suitable for the most demanding applications. It is based on Faraday’s law of Electromagnetic Induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted either integral to the sensor or remotely with a field mount kit. CBRO Flowmeters are calibrated at our own Water Flow Calibration Facility. It uses the primary method of measuring the water flow by gravimetric principle. The facility is designed for calibration of flowmeters under controlled and stable flow conditions.
|Nominal dia (mm)||10 to 3000|
|Working pressure (kg/cm2)||10, 16, 25, 40|
|Working temperature||Integral PTFE – 120oC
Remote PTFE – 180oC
Others – 70oC
|Electrode material||SS 316L Std.*|
|Sensor lining||Std. Rubber*|
|Measuring tube material||SS 304 Std.*|
|Sensor housing material||Std. CS*|
|Flange standard||ANSI 150*|
|Measuring range||0.2 to 12 m/sec. Bidirectional|
|Accuracy % of measured value||±O.5% (±O.2% consult factory)|
|Repeatability||±0.2% of Span|
|Display||2 line LCD|
|Display units||All standard engineering units in m3, litre, gallon, ft3, imperial gallon|
|Output||Std. 4 – 20 mA*|
|Power supply||12 – 60 V DC or 80 – 300 V AC/DC Solar powered|
|Protection class for sensor||Std. IP 65 Option IP 67/IP 68 for flow tube in remote type|
|Protection class for transmitter||IP 67|
|Cable length for remote||Std. 10 m*|
|Installation||Inline flanged type|